Color Television TP3675
pres page 5.5x8.5/JM3 4/26/00 8:38 AM Page 2 Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once, and take advantage of these important benefits.
pres page 5.5x8.5/JM3 4/26/00 8:38 AM Page 3 Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS MAGNAVOX product owner: Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
CONTENTS Page • • • • • • • • • • • • • • • • • • • • • • Presidential Letter ...................................................................................................................... 3 Important Safety Instructions ................................................................................................5 - 6 Supplied Accessories ................................................................................................................. 7 Before Operating Your Television .......
pres page 5.5x8.5/JM3 4/26/00 8:38 AM Page 4 SAFETY INSTRUCTIONS Read before operating equipment. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2.
pres page 5.5x8.5/JM3 4/26/00 8:38 AM Page 5 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC) Section 810 of the National Electrical Code, ANSI/NFPA No.
VCR CH SWAP REC STOP FREEZE POSITION SELECT PAUSE FF PLAY REW MUTE CATV D VOL + CH CH PIP VOL A MENU 9 0 C B 8 7 4 A/CH PERSONAL PREFERENCE 6 5 100 3 VCR 1 TV POWER INPUT STATUS 2 INPUT TV Supplied Accessories Infrared Remote Control Part Number : 4835-218-37294 Size AA Dry Batteries Before Operating Your Television WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s
Antenna Connections (Continued) OUTDOOR ANTENNA CONNECTION • Use one of the following two diagrams if you connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antenna. • Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set. A. Combination VHF/UHF VHF/UHF ANTENNA or VHF/UHF ANTENNA 300/75-ohm ADAPTOR (not supplied) 300-ohm twin-lead B.
Quick Reference Control Operation L Location of Controls Front Panel A POWER Press → On. Press again → Off. B VOLUME UP/DOWN (+) Increases sound. (–) Decreases sound. C SENSOR AREA FOR REMOTE CONTROL D CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. • Press both at same time to access MAIN MENU Screen. VIDEO/AUDIO IN 2 TERMINALS (VIDEO/AUDIO terminals are also provided on the rear.) E E C A B Basic Remote Control Functions POWER Press → On. Press again → Off.
AUTO PRESET during First Power On L When you turn on the TV for the first time, it will automatically memorize the broadcasting channels. Please perform the following instructions before you press the power button. (1) Insert the batteries into the remote control. (See page 7) (2) Connect the antenna cable to the TV set. (See pages 7 - 8) (3) Plug in the AC POWER cord to the wall outlet.
Accessing the MAIN MENU screen without Remote Control • If you misplaced your Remote Control you can still access most settings via the MAIN MENU screen when you press both CH UP (8) and DOWN (9) on the TV set. • Some features of your TV set will not be accessible without the Remote (On the set) Control. If you lost your Remote Control, contact a Philips Magnavox Authorized Servicer for a replacement. Language L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
Sleep Timer L You can set the number of minutes for your TV to automatically turn off. 1 2 Press MENU to access MAIN MENU screen. Press VOL (+) or (–) to access TIMER SET mode. → (MAIN MENU screen) 3 4 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes. Press MENU to exit. → NOTE: (TIMER SET mode) • To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during step 3.
Video Adjust (Continued) 5 Press VOL (+) or (–) to adjust the setting. VOL UP (+) increase contrast VOL DOWN (–) decrease contrast 6 Repeat steps 4 - 5 to adjust other settings. 7 Press MENU to exit. Audio Select L MTS (MULTICHANNEL TV SOUND) This circuit allows reception of stereo or bilingual TV sound. L INTERNAL SPEAKER SWITCH This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers by using the AUDIO OUTPUT JACKS on page 35.
Audio Select (Continued) Example: Actual screen indicating ON AIR when receiving STEREO broadcasts. Actual channel number “← ON AIR” will appear next to STEREO or SAP when receiving STEREO or SAP broadcasts. (Channel call on screen) L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available. • Stereo broadcasts Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound. • SAP broadcasts Television broadcast can be received with either MAIN or SAP sound.
Closed Caption (Continued) 4 Press CH UP (8) or DOWN (9) to move the “ ” mark to either “MODE” or “DATA”. 5 Press VOL (+) or (–) to change the CLOSED CAPTION setting. MODE : 6 DATA : Press MENU to exit. NOTE: • If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION] mode automatically. Pressing MUTE again will return the set to its previous condition. • Closed Caption may malfunction (white blocks, strange characters, etc.
TM Parent Control (SmartLock V-CHIP Operation Continued) • MPAA RATING (Example) Example 1. “PG-13” in the age-based rating is blocked. This will automatically block the high ratings “R”, “NC17” and “X” also. Example 2. “R” in the age-based rating is blocked. This will automatically block the high ratings “NC-17” and “X” also. NOTE: • MPAA RATING is only age-based ratings.
TM Parent Control (SmartLock V-CHIP Operation Continued) Example 1.2 : Age-Based setting For “TV-G” select “BLOCK” for “AGE”. This will automatically block the higher age ratings “TV-PG”, “TV-14”, “TV-MA” and “TV-G”. Furthermore, the Content Ratings “D”, “L”, “S”, “V”, “FV” are automatically blocked as well for “TV-PG”, “TV-14” and “TVMA” in addition to “TV-G”. Example 2.
TM Parent Control (SmartLock V-CHIP Operation Continued) L HOW TO SET SmartLock V-CHIP TM REMOTE KEYPAD A/CH VOLUME (+)/(–) CHANNEL UP (8)/ DOWN (9) MENU [1] MPAA RATING 1 Press MENU to access MAIN MENU screen. T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 2 Press CH UP (8) or DOWN (9) to move the “ CONTROL”.
Parent Control (SmartLock V-CHIP Operation Continued) TM [2] TV GUIDELINES 1 2 Repeat steps 1 - 3 of [1] MPAA RATING. 3 Press VOL (+) or (–) to access TV GUIDELINES mode. 4 Press CH UP (8) or DOWN (9) to move the “ GUIDELINES”. ” mark to “TV To change CONTENT SETTING, press CH UP (8) or DOWN (9) to move the “ ” to the desired rating and then press VOL (+) or (–) to select.
Parent Control (SmartLock V-CHIP Operation Continued) TM TM [3] ACTIVATE TO TURN ON SmartLock V-CHIP BLOCK 1 Press CH UP ( 8) or DOWN (9 ) to move the “ ” mark to “STATUS”, then press VOL (+) or (–) to activate the SmartLockTM V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.) → 2 Press MENU, then “INPUT SECRET No.” will be displayed. 3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 4 Press MENU and SECRET No. is registered.
Parent Control (SmartLock V-CHIP Operation Continued) TM L To change the SmartLock V-CHIP BLOCK setting. (Secret No. is registered.) TM 1 Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed. 2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat configuration of the V-CHIP BLOCK. L If you intend to change or have forgotten your Secret No., clear the original Secret No. and set up a new one.
Parent Control (SmartLock V-CHIP Operation Continued) TM L DOWNLOAD SmartLock V-CHIP DATA TM REMOTE KEYPAD VOLUME (+)/(–) A/CH CHANNEL UP (8)/ DOWN (9) MENU 1 If you watch the program with “New Rating System Data”, DOWNLOAD screen will be displayed. (DOWNLOAD screen) 2 DOWNLOAD screen will disappear, if DOWNLOAD is finished. NOTE: • DOWNLOAD would not be started if you don’t watch the program with “New Rating System Data”. [3]-B.
Parent Control (VIEW TIMER) L VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on.) • VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in 30 minutes intervals. OFF TIME (Restricts TV watching after the VIEWING TIME reaches zero.
Parent Control (VIEW TIMER Continued) 9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 10 Press MENU, and SECRET No. is registered. → Example: • To restrict anybody from watching the TV for 5 hours, after watching the TV for 2 hours, your settings would look like this: • They can choose to watch the 2 hours of TV however they wish. For example, they could watch 1 hour of TV, turn TV off for 30 minutes, then turn TV on and watch the remaining 1 hour on the VIEWING TIMER.
Parent Control (VIEW TIMER Continued) 2 Press and hold both VOL (+) and CH DOWN (9) on the TV set simultaneously until the VIEW TIMER access screen is displayed. Now you can cancel the VIEW TIMER settings or can change the SECRET No. while “INPUT SECRET No.” is displayed. (On the set) L Notice of Remaining VIEWING TIME • For every 30 minute interval, the “remaining time” will be displayed for four seconds. For the last five minutes, the “remaining time” will be displayed every minute.
AUTO PRESET REMOTE KEYPAD L AUTO PRESET By operating the channel presetting functions, you can preset your TV to the desired channels for viewing. VOLUME (+)/(–) A/CH CHANNEL UP (8)/ DOWN (9) MENU 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ UP”. ” mark to “SET → (MAIN MENU screen) 3 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”.
AUTO PRESET (Continued) L CHANNEL SETTING If AUTO PRESET does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8 ) or DOWN (9 ) to move the “ ” mark to “SET UP”. → (MAIN MENU screen) 3 4 Press VOL (+) or (–) to access SET UP mode. Press CH UP (8 ) or DOWN (9 ) to move the “ ” mark to “CH SETTING”. → (SET UP mode) 5 Press VOL (+) or (–) to access CH SETTING mode.
AUTO PRESET (Continued) L Saving broadcast TV channels into memory. 1.1 Press MENU to access MAIN MENU screen, then press CH UP ( 8 ) or DOWN (9) to move the “ ” mark to “SET UP”. Press VOL (+) or (–) to access SET UP mode, then press CH UP ( 8 ) or DOWN (9) to move the “ ” mark to “CH SETTING”. Press VOL (+) or (–) to access CH SETTING mode. Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SEARCH”, then press VOL (+) or (–) to access CH SEARCH mode. 1.2 1.3 1.
AUTO PRESET (Continued) 2.1 2.2 Press VOL (+) or (–) to access CH MEMORY. Use CH UP (8) or DOWN (9) or REMOTE KEYPAD to select each desired channel to add or erase. 2.3 Press VOL (+) to add a channel to the TV’s memory or press VOL (–) to erase a channel from the TV’s memory. 2.4 Press MENU to exit.
AUTO PRESET (Continued) 6 Press MENU to exit. NOTE: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”. • While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on.
AUTO PRESET (Continued) 8 Press MENU to exit. L To select the PERSONAL PREFERENCE channel. If the channels are memorized as shown to the right, press the Remote’s “A” button to select the Channels below. L UNIVERSAL PLUS FUNCTION VCR input mode will be selected automatically by pressing VCR PLAY button on UNIVERSAL REMOTE CONTROL. 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8 ) or DOWN ( 9) to move the “ “SET UP”.
Smart Window PIP (Picture In Picture) TM L With the VIDEO inputs, you can watch two pictures at the same time: one from the antenna or cable TV input and the other from the VIDEO input. PIP SWAP FREEZE PIP SWAP FREEZE POSITION SELECT L To View the Inset Picture. Press PIP. (Press the button to turn the Inset Picture on and off.) L Channel Display when SmartWindowTM PIP is ON (4 seconds).
Smart Window PIP (Picture In Picture) (Continued) TM L To Move the Inset Picture. Press POSITION. (Press the button again to move the Inset Picture to another position.) L Freeze-Frame Inset Pictures • When the Inset Picture is on the screen, press FREEZE to freeze the Inset Picture. Only when the Main Picture is on the screen, press FREEZE to inset a freeze-frame of the Main Picture. • Press FREEZE again to remove the Inset Picture.
Using the Video and Audio Input Jacks L Connecting video equipment for playback of video material. • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminal.
Using the Video and Audio Input Jacks (Continued) • It is the intent of Philips that this product be used in full compliance with the copyright law and that prior permission be obtained from copyright owners whenever necessary. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cords can be obtained from your local video store.
Operation of Remote Control L “Identifying” Remote VCR and Cable TV Converters Your Remote Control has been set at the factory to operate your TV and many remote control VCRs and Cable Converters. However, in some cases an easy one-time set-up step may be necessary before the Remote will operate accessory VCRs and Cable Converters. • In this set-up step, the Remote locates and memorizes the remote control transmitter code for the VCR or Cable Converter.
Operation of Remote Control (Continued) VCR POWER INPUT STATUS REMOTE KEYPAD CHANNEL UP (8)/ DOWN (9) TV-CATV L HOW TO IDENTIFY A VCR The remote control may already be set to operate your VCR. Try this initial check to see if going on to the following “identify” section is necessary. (1) Point remote towards VCR and press VCR POWER. (2) Does the remote turn the VCR ON and OFF? • If yes, the remote is ready to operate the VCR and no further steps are needed. • If no, continue to the “identify” section.
Operation of Remote Control (Continued) VCR BRAND TV POWER INPUT STATUS REMOTE KEYPAD CHANNEL UP (8)/ DOWN (9) TV-CATV TIPS ON IDENTIFYING YOUR VCR: If your VCR model does not have the CHANNEL UP function on its remote control, it cannot be identified using the SEARCH method of identifying. For such models, please try the DIRECT ENTRY method of identifying. Be Patient: a minute or two can seem a lot longer when you’re waiting for something to happen, but the code should be identified within two minutes.
Operation of Remote Control (Continued) (1) Slide TV-CATV switch to CATV. (2) Press and hold down INPUT STATUS and CH DOWN (9) on your remote control. Then release both buttons. (3) Within ten seconds after releasing INPUT STATUS and CH DOWN ( 9 ) , enter your converter’s two-digit code number using REMOTE KEYPAD (refer to list). • The remote control is now ready to send commands to your converter.
Before Calling for Service X X External Electrical Noise Interfering with TV’s Operation No Picture or Sound Dark and Blank Picture Sound OK, Picture Poor Picture OK, Sound Poor Ghosts in Picture Picture Blurred Weak Picture X X X X X X X X Is antenna connected to terminal on the back of the set? X If outside antenna is being used, check for broken wire. X X X X X Check for local interference or external electrical noise. Turn off with POWER button and then turn it on after about a minute.
pres page 5.5x8.5/JM3 4/26/00 8:38 AM Page 6 LIMITED WARRANTY COLOR TELEVISION 90 Days Free Labor/One Year Free Replacement of Parts (Two Years Free Replacement of Color Picture Tube) This product can be repaired in-home. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
pres page 5.5x8.5/JM3 4/26/00 8:38 AM Page 7 local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). MAKE SURE YOU KEEP... Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner’s manual and keep both nearby. Also keep the original box and packing material in case you need to return your product. BEFORE REQUESTING SERVICE...
Notes: 43 43-48 TP3675C 43 6/9/00, 9:37 AM
Notes: 44 43-48 TP3675C 44 6/9/00, 9:37 AM
Notes: 45 43-48 TP3675C 45 6/9/00, 9:37 AM
Notes: 46 43-48 TP3675C 46 6/9/00, 9:37 AM
Notes: 47 43-48 TP3675C 47 6/9/00, 9:37 AM
Printed in U.S.A.
