Manual

11-- On-screen displays (OSD)
OSD Main menu screen
Press the MENU button on the remote to display the main menu screen.
Then, press the NUMBER button on the remote control for the desired
feature displayed on the menu. When you select a feature, turn to the
section in this manual and read the accompanying instructions.
VCR Status display
1. Press the MENU button.
2. Next, press the 2 button to select "VCR SET UP."
3. Then, press the 3 button to select "ON SCREEN MODE."
4. Now, press the 1, 2, or 3 button to select "ON SCREEN ON,"
"COUNTER ONLY" or "ON SCREEN OFF."
"ON" appears beside the selection made.
l _oS_L._:CTPUSHNO._
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 CLOCK SET
5 DAYLIGHT SAV, TIME
TO END PUSH MENU
Main menu
I TO SELECT PUSH NO. SPK::)WN
1 NORMAL PLAY ON
2 REPEAT PLAY
3 ON SCREEN MODE
4 AUDIO OUT
5 LANGUAGE
VCR set up
POSITION
ON-SCREEN ON: Whenever a function button (Stop, FF, etc.) is
pressed, a 5 second VCR Status Display appears.
COUNTER ONLY: Whenever a function button (Stop, FF, etc.) is
pressed, a 5 second VCR Status Display appears.
After 5 seconds, the counter information will remain on the screen. To
remove, press the STATUS button.
ON-SCREEN OFF: In this position, there will be no indication when
normal functions are pressed.
• You may display the VCR Status any time by pressing the STATUS
button. Status display remains on for 5 seconds. To remove press this
button again.
• Channels (when tuned) are displayed as an overlay for a few seconds.
VCR button
Pressed Time
rI'uner -sJo L, ,h 1
• ,. -']'_VS_REO '2:_,2-_--C anne
AUalO / _]EOn-- MTS
l_dCt _ '°_ [ broadcast
_p M,:23:,_.,F,...._Audio Out
] / Mode
Tape --Counter and
Speed Counter Memory
VCR Status display
Fast Track through "Turn on your VCR"
1. If the record tab on a cassette (see page 5 for details) is removed,
playback starts automatically.
Or
1. To skip Step 2 on page 7, press the MENU button. All on-screen
displays will be in English.
2. To skip Step 3 on page 7, press the STOP button. You can now play a
pre-recorded tape.
"TUNER NOT SET" briefly appears on the screen.
Blank tape or Channel indication
If a blank section of tape is encountered in the Play mode or the
channel you select has no broadcast, the screen will change to a solid
blue field. The screen will remain blue until a recorded signal is again
detected or an active channel is selected.
ELECTPUSHNO. SHOWN "_
ENGLISH ON I
ESPAI_IOL l
SELECTIONOR I
L PUSHMENUTOCONTINUE .,..)
CONNECTAN'[ENNAORCABLE
TO VCR
THEN,..
PUSHCH UP KEY
OR,..
FOR PLAY ONLY-PUSH STOP
TUNERNOT SET
"Fast Track" displays