Manual

12-- Remote control
POWER button
Press to turn VCR power ON or OFE
Also, to set the VCR for unattended
timer recording.
NUMBER buttons
(0, l, 2, 3, 4, 5, 6, 7, 8 and 9)
Use for channel selection, on-scrccu menu sclcctiou, clock
setting, program setting, etc. For selecting channels 1 to 9, ilrst
press "0" button and then press "1" to '°9."
(+100)
Press this button first when selecting channels 100 and higher.
For details, see page 8.
CHANNEL UP/DOWN buttons
Press "A" or "V" to scan up or down through the VCR's
channels. Release at desired channel.
SLOW button
First press the SLOW button during SP, LP, or SLP playback to
view a slow-motion picture. The speed can be varied from
about 1/6 to about 1/30 of normal speed with the F.FWD or
REW SLOW button. For details, see page 24.
FRAME ADVANCE button
Press this button while in the Still mode to advance the pictu_e
one frame at a time (Frame Advance). For details, see page 24.
PAUSE/STILL button
• Press once to temporarily stop the tape during recording
(Pause).
• Press once to freeze the tape picture during playback (Still).
Press PLAY button when you want to resume normal
playback or recording. For details, See page 24.
TRACKING UP/DOWN buttons
When playing a tape, press TRACKING "_" or '"_/" button to
adjust the tracking. For details, see page 25.
VCR/TV button
Press to select the signal source that your TV receives.
VCR position (VCR light on the display panel: ON)
To watch a tape, monitor a recording, or watch aTV broadcast
selected with the VCR's channel selector.
TV position (VCR light on the display panel: OFF)
To watch TV or to watch one program while recording another.
For details, see page 17.