Manual

19-- Timer recording
_ Select the "TIME ON"
Select the "TIME OFF"
Select the recording speed
----_ Select the "START DATE"
PROGRAM 1 _
CHANNEL 06
TIME ON 09:30 PM
TIME OFF 10:00 PM
"_P_"_"" i
TO CORRECT PUSH CLEAR _,_
TO END F_ ME(_J )_
Confirm your program
Set the
POWER buttoa to OFF.
"PLEASE TURN OFF VCR FOR TIMER RECORDING"
flashes on your TV screen 2 minutes before a timer recording starts.
Turn the VCR off. The TIMER light appears on the VCR's Display
anel. Until this warning appears, you can play a tape or select
channels for viewing using the VCR. THE VCR MUST BE TURNED OFF
FOR A TIMER RECORDING TO TAKE PLACE.
I After a recording place... )
timer has taken
...press the VCR POWER button on the remote control to return
your VCR (Video Cassette Recorder) to normal operation.
If you're having
questions or problems
I. Turn the VCR on. "VCR" appca_ s o_ the
Display panel. If it doesn't, press the
VCR/TV button.
2. First, press the MENU button.
Next, press the 1button to select
"PROGRAM."
Now, press the 4 button to select
"PROGRAM REVIEW."
The Timer Record information for the
lowest numbered position ( 1- 8) appcars.
¢ NORMAL PROGRAM
P_O_RAM, Event
CHANNEL 06
TIME ON 09:30 PM Position
TIME OFF 10:00 PM
REC SPEED SP
S'TART DATE 07/12,"94
TUE.
TO CANCEL PUSH CLEAR
• NEXT=I END-=MENLI
3. Press the 1button repeatedly to view all
the filled positions.
If you do not press the 1 button, after 10
seconds the display changes to the next
filled position, This continues until all
filled positions appear. Finally, the screen
returns to the TV program.
4. Press the CLEAR button. This clears a
filled position.
5. At any time, press the MENU button once
to exit the Program Review mode.
6. Repeat steps 2 - 4 to make sure you have
cleared the correct position. To fill a
position, follow "Timer Recording" steps.
1. Press the STOP/I'JECT butto_ (m the
VCR.
Actual Timer Recording stops. But if
you press the POWER button again, the
timer recording will be carried out as
programmed.
events overlap, the lowest
position) program number has
priority.
Example: If you programmed as illustrated,
they will execute in the following order.
9:00AM- 10:00AM for PROGRAM 2
10:00AM- 12:00PM for PROGRAM 1
12:00PM- for PROGRAM 3
lf the Power Fails...repeat the steps
n pages 7 and 10 before setting up a
imer Recording.
(For additional information, see page 33.)