Manual

30- Special VCR features
Place local channels in VCR's memory
ead steps 1- 4 to place receivable channels in your VCR (Video Cassette RCcolder). Although your VCR
automatically scans all Normal TV channels and places receivable ones in memory the first time you turn its powc_ on,
this function lets you re-program your VCR's tuner at any time. This allows reception of either Nonnal TV channels or
Cable TV channels, but not both. With the Add/Delete feature you can add or delete any channel. You must use your
remote control.
Make sure ...
Display the Tuner Set Up mode
--_ Select the antenna system
Pressi_e 1 button to chang_
"ON appears _side you_
_ Start auto program
6 "IV STEREO
7 2ND AUDIO
TO END PUSH MENU
MENU m
button
r-_lC:Jc:::_¢:_I
C21C_C_ c-n
-NUMBER
buttons
- CHANNEL
UP/DOWN
buttons
----_ Finish auto program
Remote Control
-_ Adding and Deleting a Channel
1. Press the MENU button to display the menu screen. Next, press the 3 button to select
"TUNER SET UP."
2. Press the 4 button to select the Add/Delete channel feature. The display shown here will
appear.
3. Press two numbers to add or delete channels up to 99. For 100 or more, first press the
100 button, then two numbers.
• Always enter a "0" before any single-digit entries. For example, 0, then 6 for "6."
• Refer to "Using the 100 button" (Page 8) to enter a three-digit number.
4. Press the 1, 2, or 3 button to "ADD," "DELETE," or "SELECT ANOTHER CH" that is
in the VCR's memory.
If "3" is selected, the display in step 2 will re-appear.
To exit the Add/Delete mode, press the MENU button once.
Note:
Channel O, 0 (Line input) cannot be added or deleted from the VCR's memory.
I SELECT CHANNEL NUMBER
CH xlz
TO END PUSH MENU
TO SELECT PUSH NO SHOWN
OH 12
1 ADD
2 DELETE
3 SELECT ANOTHER CR
TO END PUSH MENU