Manual

10
Setting the Clock
*e_e'e=''eOe_''''*ee.'ee___'eee=eeoe''e_e___°°*e_°*°__°°*_°°__°°°°___°°°°___o__'''_'___'_°°°°__°°°_°'_'°°°°°_°°°''°°_°°_''____°'oe_o
When you do not use the TV GUIDE ,,1
Plus+ system, there are two ways to set
,3
the clock. With manual clock setting,
you tell the VCR the current time. The
VCR then adjusts thetime accordingly.
With automaticclock setting, the VCR
gets the current time from your local PBS
station. It keeps track of the time by con-
stantly referring to the time broadcasted
by your PBS station. Follow the instruc-
tions under either manual clock setting
or automatic clock setting (page 11) to
set the VCR's clock. Make sure:
• The VCR is hooked up and turned on,
and channels are programmed into the
VCR's memory.
• The VCR is in VCR position (see pages
15-17).
• You make each entry within 60 seconds
of the previous entry (otherwise, the
VCR will exit Clock Set mode and you
will have to start over).
• You have correctly chosen TV or
CABLE TV at the TUNER SET UP
menu.
Manual Clock Setting
1
Press the MENU button to bring up the
main menu display.
O SELECT PUSH NO. SHOWN_
1 PROGRAM |
2 VCR SET UP l
3 TUNER SET UP l
4 SET CLOCK l
5 REMOTE LOCATOR l
6 TV GUIDE PLUSSET UP )
_TO END PUSH EXff J
2
Press the Number 4 button to select SET
CLOCK.
UTO CLOCK [ON] \
AYLIGHTSAV TIME [OFF] I
ET MANUALCLOCK OFF] I
1 4 SET TIMEZONE |
(AUTO
I CABLE _3OXUSERS /
[ SET CLOCK MANUALLY
\ TO SELECT PUSH NO, SHOWN /
END PUSH EXIT /
Press the Number 3 button to sclcct
SET MANUAL CLOCK.
4
Press two Number buttons for the
hour(s) and two Numberbuttons for
the minute(s). Then press 1 for AM
or 2 for PM. For example, for 2:15
PM, press 02, 15, 2.
• Enter a 0 before a single digit num-
bet.
Entries that do not match the VCR's
internal calendar will cause a ques-
tion mark (?) to appear on-screen.
To make corrections, press the
CLEAR button until the space for
the number you want to correct is
flashing. Then enter the correct
number.
if TIME 02:15 PM
_"_:-:_--_-- l
5
Press two Number buttons for the
month, two Number buttons for the
day, and two Number buttons for the
year. For example, for July 1, 1996,
press 07, 01, 96. The day of the
week will appear automatically.
TIME02:=PM
CLEA /
Daylight-Saving Time
Selection
When you do not use the TV GUIDE
Plus+ system, follow the steps below to
program the VCR so its Clock will auto-
matically move forward one hour in
April and turn back one hour in
October.
1
Press the MENU button to bring up
the main menu display.
O SELECT PUSH NO. SHOWN_.
I PROGRAM " I
2 VCR SET UP l
3 TUNER SET UP [
4 SET CLOCK |
5 REMOTE LOCATOR |
8rvGU,OEPLUSSETuP )
_0 END PUSH EXIT ./I
2
Press the Number4 button to select
SET CLOCK.
AUTO CLOCK - [OFF] _i
DAYLIGHTSAVTIME [OFF] I
SET MANUALCLOCK [ON] I
SET TIME ZONE |
(AUTO
t CABLE l_)XUSERS [
SETCLOCK MANUALLY "l
\ TO SELECT PUSH NO, SHOWN /
END PU,_rl EXIT
3
Press the Number 2 button so that ON
appears to the right of DAYLIGHT
SAV TIME.
//'- sETct0c_
I 1 AUTOCLOCK [OFF]
I 2 DAYLIGHTSAVTIME [ONJ [
I 3 SET MANUALCLOCK {ON} [
I 4 SETTIME ZONE |
(AUTO
l CABLE _OX USERS I
SET CLOCK MANUALLY /
,,TOSELECTPUSHNO.S OWN/
OEN PUS.E=T
4
Press the STATUS/EXIT button to
exit.
6
Press the STATUS/EXIT button to
start the clock. The screen will return
to the program you were watching.