Manual
13
On-Screen Displays
VCR Status Display Screen
Function Receiving and
Button Recording Mode
Time Channel
:.
Audio Out
Pressed ]
_STOp /
I TVSTEREO
LP M 1123:45
Tape Counter
Speed and
Counter
Memory
Mode
oe*oe*lleletelelo*loolleeeeeeeeo*loillllleelle •
I IIIIIIIIIIII
• lfthe channel yuu selecl has m) broad-
cast, the screen will become a solid blue
field. The screen will remain blue until
you select an active channel.
• You may bring up the status display at
any time by pressing the STATUS/EXIT
button.
(The exception is when viewing a still •
picture or a slow motion picture, or
when the EFWD or REW(ind) button is i
pressed during playback.) i
• Channel numbers (when tuned) are dis-
played for a few seconds.
VCR Status Display
A status display, which includes the current time, channel, and other infornm-
tion (see illustration of the status display at left), will appear when you press
the STATUS/EXIT button or certain function buttons.
The contents of the status display may vary.
ON SCREEN ON:
• Whenever you press the STOP button or the PLAY button, the status display
will appear for five seconds.
COUNTER ONLY:
• Whenever you press the STOP button or the PLAY button, the status display
will appear for five seconds. After five seconds, only the counter will remain
on-screen. You must press the STATUS/EXIT button to remove it.
ON SCREEN OFF:
• The status display will not appear when you press function buttons.
• You must press the STATUS/EXIT button tO see the status display.
To choose the status display mode:
1
Press the MENU button to bring up the main menu display.
! PROGRAM l
2 VCRSETUP l
3 TUNER SET UP 1
4 SET CLOCK 1
5 REMOTE LOCATOR 1
6 l'V GUIDE PLUSSET UP )
END PUSH EXIT J
2
Press the Number 2 button to select VCR SET UP.
_ SELECT0USHNO.SHOWN_x
1 PNS'[ANTINFO OFF
2 REPEAT PLAY OFF[
3 ON SCREEN MODE /
4 AUDIO OUT l
S LANGUAGE l
6 GUIDE CHANNELSET J
7 GUIDE CHANNELMAP ]
ENDPUSH EXIT
3
Press the Number 3 button to select ON SCREEN MODE.
SELECTPUSH NO. SHOWN_
ONSCREENON ON I
COUNTEERN0%FLY i
E DPUSHEX,T/
4
Press the Number 1 button to select ON SCREEN ON, the Number 2 button to
select COUNTER ONLY, or the Number 3 button to select ON SCREEN OFF.
ON will appear beside the selected status display mode.
i5
• Press the STATUS/EXIT button to exit.