Manual

20
One Touch Recording
The one touch recording (OTR) function
allows you to program an immediate timed
recording 30 minutes to four hours long
without setting the timer. Before you
begin, make sure:
• Channels have been programmed.
• The desired recording speed (SP, LP,
SLP) has been selected with the (Tape)
SPEED button.
• There is a tape in the VCR. Make sure
the tape's record tab is intact and the tape
is long enough to record the program(s).
• The VCR is in VCR position.
Starting an OTR
1
Use the CH(annel) Up/Down buttons or the
Number buttons to select the channel you
want to record.
2
Press the REC(ord)/OTR button repeatedly
until the desired recording length (30 min-
utes to four hours) appears in the upper left
comer of the screen. Recording will begin
immediately.
_f'OTR (0:30) 1
CH12
\
Stopping an OTR
To stop an OTR before recording is fin-
ished, press the STOP button or the
POWER button. To cancel the OTR but
continue recording, press the
REC(ord)/OTR button until REC appears in
the upper left comer of the screen.
Remote Control
_
Press the
REC(ord)/OTR but-
ton repeatedly until
the desired recording
length appears in the
upper left comer of
the screen.
MAC41AVOX
66o
© - ©
uN_
r-_ r-rn r-7-1
r-z-1r-_ r-_
r-7-1r-Tn r-_
-_0 0 0
££oo
£ .@..:'Q
®0®®
OOQQ
Tusle the CH(annel)
Up/Down buttons or
the Number buttons
to select the channel
you want to record.
• To check the time remainingJor an OTR after the OTR has been set, press
the STATUS/EXIT button.
• To change the recording length while an OTR is in progress, press the
• REC(ord)/OTR button until the desired length appears on-screen.
• lfyou begin an OTR when a recording is paused, the OTR will begin.
• You can not pause recording (for example, during commercials) during an
OTR.
• • If the preset time for a timer recording comes up during an OTR, the OTR
has priority.
• • The REC(ord)/OTR button on the remote control will not start an immediate
• recording if the TV GUIDE Plus+ menu is on-screen.
• • When you press the GUIDE PLUS+ button to access the TV GUIDE Plus+
system while the VCR is recording a program, CAUTION: ACTIVATING TV
• GUIDE PLUS WILL STOP RECORDING will appear on-screen for 10 see-
" onds. lfyou want to continue recording, press the STATUS/EXITbutton to
exit. If you press the GUIDE PLUS+ button again while the message is on-
" screen, the VCR will stop recording and will access the TV GUIDE Plus+
system. If you do not press any buttons within 10 seconds, the message will
• disappear and the VCR will continue recording.