Manual

21
Rerecording (Tape Duplication)
Connections
VCR 1 VCR 2
Playing VCR Recording VCR
(back view) (back view)
AUDIO ]]]
and I1'
Jacks
J
OODQODODBDO]DO0
From VIDEO OUT to VIDEO IN
From AUDIO OUT to AUDIO 1N
TV
on channel
3 or4
_."
"_"_"_OUT(put"
[ [ AUDIO and Jack
I VIDEO
I IN(put)
Jacks
Audio and video cables are not included.
Operation
1
Put a prerecorded
tape in VCR 1.
m
Point the remote con-
trol at VCR 2 and
press the Number but-
tons 0, 0, 1 or 0, 0, 2.
5-L
Use the (Tape)
SPEED button to
select the recording
speed of VCR 2.
3
Select channel 3 or
4 at the TV.
VCR 1
MAC41_tOK
000
i--_ r-_-ir-n
0000
Remote Control
6
Press the PLAY but-
ton on VCR 1 and the
REC(ord)/OTR but-
ton on VCR 2 at the
same time.
To stop recording,
press the
STOP/EJECT button
on VCR 1, then press
the STOP/EJECT
button on VCR 2.
m
2
Put a blank
tape in VCR 2.
i The instructions on this page show you how to copy
! tapes. The illustration uses two VCRs just like
yours. Different VCRs may operate differently.
i 1 willp_ay your tape. Insert a prerecorded
_()_;ECT'nVCR 1. If the tape does not have a record
begins. If this happens, press the
button on VCR 1 once.
• VCR 2 will record your tape. Insert a blank tape
in VCR 2. Make sure the VCR 2 power is on
and VCR 2 is in VCR position.
3
Turn the TV on and set it to channel 3 or 4,
whichever channel the CH3/CH4 switch on VCR
2 is set to.
4
Point your remote control at VCR 2.
• If you use the AUDIO and VIDEO IN(put)
jacks on the back of VCR 2, press the Number
buttons 0, 0, 1. L1 will appear on the VCR 2
display panel. AV REAR will appear on-screen.
• If you use the AUDIO and VIDEO (Input) jacks
on the front of VCR 2, press the Number but-
tons 0, 0, 2. L2 will appear on the VCR 2 dis-
play panel. AV FRONT will appear on-screen.
• You can also select L1 or L2 by using the
CH(annel) Up/Down buttons.
5
Point the remote control at VCR 2. Use the
(Tape) SPEED button to select SP, LP or SLP.
6
Press the PLAY button on VCR 1 and the
REC(ord)/OTR button on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on
VCR 1, then press the STOP/EJECT button on
VCR 2.
• Unauthorized recording of copyrighted televi-
sion programs, video tapes, or other materials
may infringe on the rights of copyright owners
and violate copyright laws.
• You can use the AUDIO and VIDEO (Input)
: jacks on the front of VCR 2 or the AUDIO and
i VIDEO IN(put) jacks on the back of VCR 2.