Manual

29
Channel Memory (cont'd)
6
Press the STA-
TUS/EXIT button
to exit.
4
Use the Number but-
tons to enter the chan-
nel number you want
to add or delete.
5
Press the Number 1
button to add that
channel, the Number 2
button to delete that
channel, or the
Number 3 button to
leave that channel
unchanged and select
another channel.
Remote Control
bring up
menu dis-
666
÷
Press the Number 3
button to select
TUNER SET UP.
Press the Number 4
button to select ADD/
DELETE CH.
Reviewing Programmed Channels
1. Press the MENU button to bring up the main menu display.
2. Press the Number 3 button to select TUNER SET UP.
3. Press the Number 5 button to select CH MEMORY REVIEW. A list of °
programmed channels will appear on-screen. •
• If all the programmed channels don't fit on-screen, press the Number 1
button to see the remaining channels. Then press the Number 2 button to °
return to the first screen of channels.
• If you do not press any buttons within 10 seconds, you will return to the •
previous menu display. .
4. Press the STATUS/EXIT button twice to exit. •
L
Adding/Deleting Channels
1
Press the MENU button to bring up the
main menu display.
2
Press the Number 3 button to select
TUNER SET UP.
3
Press the Number 4 button to select ADD/
DELETE CH.
ENDPUSH EXIT
4
Enter the desired channel number (see
"Number Buttons" on page 14).
O SELECTPUSH NUMBER_'_
CH12 [
I ADD /
2 DELETE l
3 SELECTANOTHER CH J
J
'_OENOPUS.EX,T J
5
Press the Number 1 button to add that
channel or the Number 2 button to delete
that channel. Press the Number 3 button to
leave that channel unchanged and select
another channel. If you do not make a
choice within five seconds, you will return
to the previous menu display.
6
Press the STATUS/EXIT button to exit.
The programming of the channel you added
or deleted will appear.