Manual

36
TV Code Setting
Your VCR remote control may operate your
TV. If the remote control doesn't operate
your TV now, find your brand of TV on the
list at the right, then follow the steps below
to program your remote control accordingly.
1
Point the remote control at your TV and
press the TV button. Then, press the
POWER button. If your TV comes on, try
the other TV buttons (see pages 14-15for
details). If your TV doesn't come on, or if
the other buttons don't work, go to step 2.
2
Find the brand of your TV on the list at the
right, and remember the two-digit number
to the right of it.
3
Press and release the MUTE button.
4
Within 30 seconds after releasing the
MUTE button, press and release the TV
button.
5
Within 30 seconds after releasing the TV
button, use the Number buttons to enter the
two-digit code for your TV brand. For
example, if you have a Zenith TV, press
Number buttons 1, 5.
6
Try step 1 again. If the remote control works
your TV, you're finished. If the remote con-
trol still doesn't work your TV, repeat steps 2
- 5, using another code.
There is no
guarantee that the
remote control will
work your TV.
_'° <E>
C23E3 Ei3
FTqEE37_q
EE3f-_q133
0ooo
Remote Control
6
Try step 1 again. If
the remote control
works your TV,
you're finished. If
the remote control
still doesn't work
your TV, repeat
steps 2 - 5 using
another code.
1
Press the TV button, then the POWER but-
ton, to see if the remote control operates
your TV. If it doesn't, go to step 2.
4
Within 30 seconds, press and release the
TV button.
5
Within 30 seconds, use the Number buttons
to enter your TV's two-digit code (from the
list below).
3
Press and
release the
MUTE button.
2
Find the brand
of your TV on
this list.
TV CODES
MAGNAVOX .... 01, 02, 03
PHILIPS ............. 01
EMERSON ........... 14
FISHER ............. 11
GE ................. 10
GOLDSTAR .......... 04
HITACHI ............ 12
JVC ................ 05
MARANTZ ........... 13
MITSUBISHI ......... 13
MONTGOMERY WARD .14
PANASONIC ......... 07
PANASONIC-GAOO .... 07
PHILCO ............. 14
QUASAR ............ 07
RCA ................ 10
SAMSUNG ........... 17
SANYO ............. 11
SEARS ........... 08, 11
SHARP ............. 16
SONY .............. 09
TOSHIBA ............ 08
ZENITH .......... 06, 15
• Although the remote control that comes with your VCR will work most
Magnavox TVs, as well as many TVs sold under other brand names, it is
possible that the remote control will not operate your TV
• If you had to program the remote control to operate your TV here, whenever
you replace the batteries in the remote control, you will have to program the
remote control again.