Manual

45
Other Hookups (cont'd)
With a (VCR to TV)Converter/Descrambler Box
This is an alternative to the connection shown on page 44. It allows you to program an unattended recording of more than one
unscrambled channel and to watch one channel while recordi,lg another.
Cable C
Box
RF Coaxial Cable
OUT(put) Jack
Recording One Channel/
Watching Another
1
Cable Input
ANT(enna)
IN(put) Jack
Playing a Tape
1
Use the VCRFI'V button to put the VCR in VCR position.
With the V.CR in VCR positior!, use the CH(annel) Up/Down
buttons to select the channel you want to record.
Start the recording.
2
Use the VCR/TV button to put the VCR in TV position.
3
Use the TV channel selector to put the TV on the same chan-
nel as the output channel of the cable converter box.
3
Make sure the cable converter box is on the same channel as
the yCR CH3/CH4 switch.
,al
Use the TV channel selector to put the TV on the same chan- /_1
nel as the output channel Of the cable converter box.
"1'
Press the PLAY button to play the tape.
Select the channel you want to watch at the cable converter
box.
• You cannot record scrambled channels with this connection.
• This connection will not allow you to use the TV GUIDE
Plus+ system.
VCR to Stereo TV Hookups
ANT(enna)
\ IN(put) Jack
antenna or cable
VIDEO (yellow) and
AUDIO (red and
white) OUT(put)
Jacks
Audio Cable
Back of TV
Audio and Video
Input Jacks
• A stereo audio cable (not supplied)
is used here to deliver audio to the
TV's left and right channels.
• Cables are not supplied.
• The TV must be in Line Input
mode. Please refer to your TV
owner's manual.