Manual

5
Before Using Your VCR
Putting Batteries
in the Remote Control
Remove the battery compartment
lid on the bottom of the remote con-
trol by pressing in the tab, then lift-
!ng the.lid.
2
Place three AA batteries inside the
battery compartment with their
polarities (+ and- ends) aligned as
indicated.
3
Replace the battery compartment
lid.
• The remote control attd its batteries are supplied.
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Using the Remote Control
Point the remote
control at the
VCR's remote sen-
sor, making sure to
stay within the
angle shown.
To select channels
100 - 125 using the
number buttons,
first press the 100
button, then press
the last two digits
of the desired
channel. For
example, for chan-
nel 117, press the
100 button, 1,7.
The 100 button
• will work Only
when selecting
cable channels
• and when CABLE
TV has been
selected at the
TUNER SET UP
menu.
VCR
Bitt° _
EE?[Z3 r-rl
153 I--/-11-_-1..
r-rn c-_ ffrl
crm c-_ r=_
Q .Q.._.,o,.
0000
Remote Control
VCR
Do not put objects
between the remote
control and the VCR.
To select channels
1 - 9 using the
number buttons, first
press 0, then press
the desired channel
number. For exam-
ple, for channel 6,
press 0, 6.
1.00 Button
Press Ihe VCR
button on the
remote control
before pressing
other VCR opera-
tion buttons on the
remote control.
Erase Protection
Video cassette tapes have record
tabs to ensure that recordings are
not accidentally erased.
To prevent accidental
erasure, break off the
tab with a screwdriver. _"
2 2,
To record again, cover
the hole with cello-
phane tape.
Types of Video Cassette Tapes and Tape Speeds
Tape Speed Maximum Record/Playback Time
Type T160 T120 T60
SP 2 hrs.
2 hrs. 1 hr.
(Standard Play) 40 mins.
LP 5 hrs.
4 hrs. 2 hrs.
(Long Play) 20 mins.
SLP 8 hrs. 6 hrs. 3 hrs.
(Super Long Play)
In this VCR, use only tapes with the [YI]_ mark.
The chart at the left shows the recording/playback time for
three types of video cassettes (T160, TI20, T60). There
are three playback speeds: SP, LP, and SLP. During play-
back, the VCR selects the tape speed automatically.
When recording, you can change the speed using the
(Tape) SPEED button (see page nine).
Make sure any light adhesive stick-on notes are removed
from the video cassette tape before putting it in the VCR.
Removable labels like these can jam the VCR.