Manual

9
Recording
°°o_°__°°_*°°'°t°°'__o_*o*°___°°_°°__oO0*°°°__°°__O°*_°_°°°°°°°__o°°°°°____o*_°°___°°__*o°_____*o°o_°°__oooooIo*jt_o_ooo_o__o_o_o_O
TV and VCR
Turn the TV on and set
it tochannel 3 or 4.
J
i.....a
2
In_t a tape.
m To stop recording,
j :Sn he o
pause recording. To
start recording again,
press the
PAUSE/STILL button
again or press the
REC(ord)/OTR but-.
ton.
4
Press the (Tape)
SPEED button to
select the tape speed.
000
Use the CH(annel)
Up/Down buttons or
the Number buttons
to select the channel
you want to record.
Press the
REC(ord)/OTR button
once to start recording.
Remote Control
• lfthe REC(ord)/OTR button is l)ressed while a nqw without a record tab is in the
VCR, PROTECTED CASSETTE CANNOT RECORD will flash on-screen, and the
VCR will eject the tape.
• Recording options are on pages 19 - 2Z
• You can change the tape speed while the VCR is recording, but some distortion will
appear on the tape.
• The VCR will record in a preset volume.
• The REC(ord)/OTR button on the remote control will not start an immediate
recording if the TV GUIDE Plus+ menu is on-screen.
• When you press the GUIDE PLUS+ button to access the TV GUIDE Plus+ system
while the VCR is recording a program, CAUTION: ACTIVATING TV GUIDE
PLUS WILL STOP RECORDING will appear on-screen for I0 seconds. If you
want to continue recording, press the STATUS/EXIT button to exit. If you press the
GUIDE PLUS+ button again while the message is on-screen, the VCR will stop
recording and will access the TV GUIDE Plus+ system.
If you do not press any buttons within I0 seconds, the message will disappear and
the VCR will continue recording.
Read and follow the steps below to record
a television program.
Turn the TV on and set it to channel 3 or
4, whichever the CH3/CH4 switch on the
back of the VCR is set to.
2
Insert a tape with its record tab intact
(see page five) in the VCR. The power
will come on, andthe Cassette-Inside
light will appear.
3
If the VCR light on the display panel of
the VCR appears, go to step 4. If the
VCR light does not appear, press the
VCR button, then press the VCR/TV but-
ton once.
Press the (Tape) SPEED button on the
remote control until the desired tape speed
(see page five) appears on the display
panel and on the TV screen. The tape
speed will disappear from the screen after
about five seconds.
: Use the CH(annel) Up/Down buttons or
: the Number buttons to select the channel
: to be recorded.
• Press the REC(ord)/OTR button once to
: start recording.
i7
To pause the recording (for example, during
: commercials), press the PAUSE/ST1LL but-
: ton or the PAUSE button once. To start
: recording again, press the REC(ord)/OTR
: button or the PAUSE/STILL button or the
i PAUSE button again.
: To stop recording, press the STOP button.