Owner`s manual

Recording31
Read andfollow the steps below to record a television program.
I
Turn on the TV and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of theVCR is set to.
2
Insert a tape with its record tab intact (details are on page five)
in theVCR.The power will come on.
3
Press the VCR button.
4
If theVCR light appears on the display panel of theVCR, go to
step 5. If theVCR light does not appear, press theVCR/TV
button once.
5
Press the (Tape) SPEED button until the desired tape speed
appears on-screen.TheVCR will only record in SP or SLP.D_ails
about tape speed are on pages 36 and 58.
6
Use the CHANNEL UplDown buttons or the Number
buttons to select the channel to be recorded.
7
Press the REC(ord)/OTR button to start recording.The
REC(ord) light will appear on the VCR display panel.
If the REC(ord)/OTR button is pressed while no tape is in the
VCR, NO CASSETTE will appear on-screen for five seconds.
8
To pause the recording (for example, during commer-
cials), press the PAUSEISTILL button. The PAUSE light will
appear on the display panel.
To resume recording, press the PAUSE/STILL button
again. The PAUSE light will disappear from the display panel.
9
Press the STOP button to stop recording.The REC(ord) light
will disappear from the display panel.
Turn on the "IV.
Insert a tape.
3
8
4
i
• If the REC(ord)/OTR button is
pressed while a tape without a
record tab is in the VCR,PROTECT-
ED CASSETTECANNOT RECORD
will appear on-screen briefly. The
VCRwill eject the tape.
Youcan change the tape speed
while recording, but some distortion
will appear on the tape.
TheVCR records in a preset volume.
If the end of the tape is reached
while recording, the VCR will stop
recording, rewind the tape, then
stop. Details are on page 57.