Owner`s manual

11EN 11EN

Recording Playback Editing

Introduction

Connections Basic Setup Function Setup Others

Español

689 45

Rear Panel

FUNCTIONAL OVERVIEW

Note

• Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

1. VIDEO IN jack (L1)

•

Use to connect external device with an RCA video

cable.

2. VIDEO OUT jack

• Use to connect a TV monitor, AV receiver or other

device with an RCA video cable.

3. AC Power Cord

• Connect to a standard AC outlet to supply power to

this unit.

• Unplug this cord from the AC outlet to completely

shut down the unit.

4. COAXIAL DIGITAL AUDIO OUTPUT jack

• Use to connect an AV receiver, Dolby Digital decoder

or other device with a coaxial digital input jack with

a digital coaxial cable.

5. S-VIDEO OUT jack

• Use to connect the S-video input of a TV monitor, AV

receiver or other device with an S-video cable.

6. COMPONENT VIDEO OUTPUT jacks

• Use to connect a TV monitor with component video

inputs with a component video cable.

7. AUDIO OUT jacks

• Use to connect a TV monitor, AV receiver or other

device with an RCA audio cable.

8. S-VIDEO IN jack (L1)

• Use to connect the S-video output of external device

with an S-video cable.

9. AUDIO IN jacks (L1)

• Use to connect external device with an RCA audio

cable.