Owner`s manual

28 EN28 EN
TIMER RECORDING
1
Press [TIMER PROG.].
2
Use [K / L] to select “New Program”,
then press [OK].
Timer Programming
THU JAN/06 11:00AM
Date Start End L1/L2
New Program
• If there are 6 or more programs, use
[H / G] to change pages.
3
Use [K / L] to enter the date, then
press [B].
Date
JAN/07
Mode
SP
SP 2h00m
Start
- - : - -
End
- - : - -
L1/L2
L1
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
4
Use [K / L / s / B] or
[the Number buttons] to enter the
start and end time, then press [B].
Date
JAN/07
L1/L2
L1
Mode
SP
Start
12 : 00AM
End
- - : - -
SP 2h00m
• You cannot make a program which recording
time exceeds 12 hours.
Guide to Timer Programming Display
Timer Programming
1/1
THU JAN/06 11:00AMSP (1:00)
JAN/ 07/11 12:00 AM L1 SP
Date Start End L1/L2
JAN/07 12:00AM 1:00AM L1
New Program
1
5
3
4
2
1 Title of a timer program (Contains date, time, selected
external input position, recording mode of the
program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (2 pages
maximum)
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings
are also available.
Before recording, make sure
• Connect the external tuner to either L1 or L2 and set it to output audio/video signals when it comes to the time you
want to start recording.
• Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record
another at the same time.
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.