Owner`s manual

29EN 29EN
Recording
Playback Editing
Introduction
Connections Basic Setup Function Setup Others
Español
Note
• If you have not set the clock yet:
Entry screen for the clock setting will appear instead
of the timer programming list at step 1. Continue
with the step 4 in “SETTING THE CLOCK” on page 23
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
• You cannot make a program whose recording time
exceeds 12 hours.
TIMER RECORDING
5
Use [K / L] to select the appropriate
external input position (L1/L2) to
which your external tuner is
connected, then press [B].
Date
JAN/07
L1/L2
L1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
6
Use [K / L] to select a recording
mode.
Date
JAN/07
L1/L2
L1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
Refer to “Recording Mode” on page 24.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Date
JAN/07
L1/L2
L1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
JAN/02
L1/L2
L1
Mode
Auto
Auto
Start
12 : 00AM
End
1 : 00AM
1h00m
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
7
Press [OK] when all items are entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press STANDBY-ON to Timer standby mode.
Ensure the external source is turned to
the correct channel.
Timer Programming
THU JAN/06 11:00AMSP (1:00)
JAN/ 7/11 12:00 AM L1 SP
Date Start End L1/L2
JAN/07 12:00AM 1:00AM L1
N P
Your program setting is now stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [MENU].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 30.
8
Press [STANDBY/ON ] to set the
timer program.
TIMER REC indicator will light up on the front
panel.