Owner`s manual

32 EN32 EN
SATELLITE LINK
You can set the unit to start recording whenever it detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read
any signals from the external tuner.)
• The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to
output audio/video signals when it comes to the time you want to start recording, and stop output audio/video
signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer.
• Make sure to set the satellite link standby mode when you finish setting.
1
Press [MENU].
2
Use [K / L] to select “Timer
Programming”, then press [OK].
3
Use [K / L] to select “Satellite Link”,
then press [OK].
Timer Programming
Satellite Link
Timer Programming
4
Use [K / L] to select the time and
recording mode, then press [OK].
Satellite Link
Start Mode
5:00PM SP (2Hr)
To Standby Mode
5
Use [K / L] to set the desired starting
time, then press [
B].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in step 5 to set the desired
minutes.
• If you wish to go back to the left, press [{].
6
Use [K / L] to select the recording
mode.
Refer to page 24 for details.