© 2009 Funai Electric Co., Ltd.
MAGNAVOX After all the connections are complete, connect the AC power cord. Insert two Size AA (R6) batteries. Press [DVD] first. Insert a recordable disc (refer to page 26 in the Owner's Manual on how to insert a disc). For more info, please contact 1-800-605-8610 or visit • http://www.magnavox.com/support Please read the supplied Owner's Manual for the detailed instructions. Press [STANDBY-ON (/)] to turn on the unit. n the disc to the disc tray guide. Turn on your TV.
rog ress ive_o m pati b le HDMI cable YourTV [ I_ DI_ I Cable YourTV HDMI IN HDMI cable sends both audio and video digital signals. (No additional audio connection is required.) HDMI cable HDMI cable not included. High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. WARNING: Serial No.: TO REDUCETHE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSETHIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSEDTO DRIPPING OR SPLASHING AND NO OBJECTS FILLEDWITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
SAFETY IIFORM£'I'IOI CAUTION: WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. LASER SAFETY This apparatus employs a laser. Only a qualified apparatus, due to possible eye injury.
5RI V II£ORMK'I'IOI Cleaninc) remote control (NB884UD) with batteries (AAx2) discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, cleaning agents or antistatic spray intended records.
..... Trademark Ptcture I_dak CD lnformat!on Im .................................................................................................................................................................................................. I-II1"111" ] COMPATIBLE is trademark © HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ITI DOLBY DIGITAL RECORDING ...... of Eastman Kodak Company.
SAFETY INFORMATION ........................... FEATURES ....................................... Symbols Used in this Owner's Manual ............... FUNCTIONAL OVERVIEW ........................ Front Panel ....................................... 2 8 9 10 10 ............. 39 40 40 40 40 41 43 Rear Panel ........................................ Remote Control ................................... 11 12 Make Recording Compatible ...................... Setting for Auto Chapter ..........................
/ © INFORMATION ON PLAYBACK ................... BASIC PLAYBACK ............................... 56 58 INFORMATION ON DISC EDITING ................. Guide to a Title List ................................ 70 70 Direct Playback ................................... Playback from the Title List ........................ 58 59 Editing Discs ...................................... EDITING DISCS .................................. 70 71 Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG Files ...............
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. This unit is compatible with DVD+RW/DVD-RW, which are rewritable repeatedly and DVD+R/DVD-R, which are available for recording once. Even if you choose DVDRW/DVD-R, these discs will automatically be recorded in the DVD+VR mode. Also, this unit allows you to record to the cassette tape. You can choose either one for your convenience.
To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. DVD-RW/-R recorded in VR mode or non compatible © recording format are not playable. DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents the disc (refer to page 80). DVD-R recorded in the mode other than +VR is not recordable on this unit.
1 @ 23 22 .=_, ®,®®®,®, .,, _ 21 2019 18 17 16 (*) The unit can also be turned 2* 3 ®®, @ 15 on by pressing these buttons 14 or inserting 0_ ®®® £_°_i 13 12 11 10 9 8"7 6 _=_ 5 4 a cassette tape. 1. Cassette compartment (VCR) Insert a cassette tape here. 2._OPENICLOSE button (DVD)* 14. CHANNEL • / • Press to open or close the disc tray. 3. Disc tray (DVD) Place a disc when it is open. Refer to "Front Panel Display" on page 14. 16. Infrared sensor window (DVD/VCR) 4.
FUNCTIONAL OVERVIEW 1 2 3 © D 12 51110 9878 5 4. i......................... 1. AC Power Cord • Connect to a standard AC outlet to supply power to this unit. • Unplug this cord from the AC outlet to completely shut down the unit. 2. HDMI OUT jack Use an HDMI cable to connect to a display with an HDMI compatible port. 3. ANTENNA OUT jack Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV monitor. 4.ANTENNA IN jack Use to connect an antenna. 5.
FUNCTIONAL OVERVIEW Install the batteries indicated control. (AAx2) matching inside battery compartment the polarity Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote of the remote control and the infrared sensor window 1 on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.
FUNCTIONAL 1. DTV/TV button (DVDNCR) • Press to switch between digital TV (DTV) mode and analog TV (TV) mode. 2. STANDBY-ON O button (DVDNCR) • Press to turn on the unit, or to turn the unit to the standby mode. (To completely shut down the unit, you must unplug the AC power cord.) 3. Number/Character buttons (DVD/VCR) • Press to select channel numbers. • Press to select a title/chapter/track/file on display. • Press to enter values for the settings in the main menu. • Press to enter title names.
FUNCTIONAL OVERVIEW 2 1 ................... r_w " 3 [] _iI l! i_O O" 00" 0 0 DB [: U U'U U'U U I J T 5 PM : Appears in the afternoon with the clock display. : Appears when the channel in DTV mode. is have been finished. : Appears during process. [] : Appears when indicating title / track / file number. a r4 : Appears when indicating chapter number. a playback. slow forward / reverse playback.
Read this first: 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection 3) After making . as illustrated all the connections, below. connect the AC power cords of the devices. distorted onnect this due unit to the directly copy to protection the TV. If system. the RCA audio/video cables are connected to a VCR, pictures may be oo D o rear of this unit i.........................
CONN£C"[ION • HDMI outputs the video / audio signals without • No audio connection converting to analog signals. is required. .OMlcable ..... .OMI I. ] o= ...'"::'" "-_VH _This connection isfor TV loop through only F / UHF _ 'antenna I ::I_RF coaxial cable cable TV company Press [HDMI] Front to select the HDMI output Panel Display ' '-''-' ' Video mode.
CONNECTION AUDIO RCAaudio cable _ IN / _ RCAcomponent video cable COMPONENT VIDEOIN e m AUDIO OUT 1 (Green) _J] ' Y PB D @° i......................... rear of this unit © i;;s i ,_I;] I............................ i RCAaudio cable IQ AUDIO OUT O rear of this unit This connection is for TV loop through only --_VI-t RF coaxial cable @ _:_' F / UHF _ 'antenna RF coaxial cable _'i_ _:i ca ble TV company EN 17 ..........
CONN£CTION IN iAUDIOiOUT (L1) ,®; IN --VIDEO--OUT I_RCA audio cable RCA video cable rear of this unit This connection is for TV loop through only VaHF/ UHF ntenna iiiiii!iii ¸ _;ii_;ii =F coax,a_!!i!!_!i_ili company 18 EN
CONNECTION ........ RCA video cable / RCAaudio cable IN --AUDIO--OUT (LI) AUDIO RCAaudio J] IN L _@ J_ D IN --VIDEOiOUT VIDEO IN RCAvideo ca ble ee cable/satellite box e i.........................
CON N £C"llllli=lON rear of this unit VHF / UHF antenna -? IN --AUDIO-OUT (LI) RFcoaxial cable IN --VIDEO--OUT cable RCAaudio cable RCAvideo cable TO TV RF modulator 20 EN R L AUDIO IN VIDEO IN 3 4 CHANNEL RFcoaxial cable cable TV company
CONNECTION Dolby I Digital ........ decoder _:_ rear of this unit ©]......." digital audio coaxial cable COAXIAL| / digital audio coaxial input jack AV receiver / amplifier with an HDMI input jack rear of this unit ooo e°e i......................... oooooo "JJI IlII..'.I I cablel _:=c::_ ========= 00 I © To set up "HDMI Audio" To set up "Dolby Digital" & refer to pages 84 and 92. i]1 refer to pages 82 and 87. Dolby Digital PCM LPCM Stream / Actual Output IQ i i.
After you have completed all the connections, you must find the viewing 1 2 3 channel (external input channel) on your TV. After you have made all the necessary connections, press [STANDBY-ON O] to turn on the unit. Turn on your TV. • If connected to your VCR make sure it is switched off or in standby proceeding. mode before Press "2" on the TV's remote control, then press channel down button repeatedly until you see "Initial Setup" menu.
BEF0 RE YO U S'IIIII'A R'IIIIIF This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc or the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settingsfor playing back, recording,or editing to suit your preference. The on-screen display changes in the following as you press [DISPLAY].
BEF0 RE YO U S"IIIII_A R"IIIIIF • First, track name will be displayed. [ 1 • If you press [DISPLAYI be displayed. one more time, artist • If you press [DISPLAYI will be displayed. one more time, album I This is an example screen only for explanation. Displayed items vary depending on the cassette tape you inserted. During stop mode or pause, VCR information available with HDMI connection. 1. Indicates 2. Indicates the current current 3.
BEFORE YOU S"I=ARY Press [SETUP] to display the main menu. Then use [A / V] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. [ l ........................ 1. General Setting: To go to general setting menu. 2.Timer Programming: To program a timer recording. 3.Title List: To call up the title 4. Disc Edit: © ys list. To set up the DVD setting. 5. DISC Playback Mode: To set up the disc playback setting.
BEFORE YOU AR1 Because this product to operate. Press [SOURCE] remote control, is a combination of a VCR and a DVD recorder, on the front panel, or press [DVD] (Verify that the DVD indicator on the is lit.) ° you must select first which component you wish Press [SOURCE] on the front panel, or press [VCR] on the remote control. (Verify that the VCR indicator is lit.) VCR button DVD button DVD indicator SOURCE button VCR indicator 1) Press [DVD]. 2) Press [OPEN/CLOSE 1) Press [VCR].
You need to follow these steps when you turn on this unit for the first time. Viewing Channel on Your TV" on Follow the procedure in "Finding the page 22 to display "Initial Setup" menu. 2 © Use [A / V] to select your desired language, then press [OK]. ii: ¸ iii!i 3 Use [A / V] to select the type of broadcasting signal, then press [OK]. The unit will start getting your area.
If you have changed antenna following procedures. connection, we recommend that you program available channels in your area with the select "General Setting", then press Press [SETUP] and use [A /T] to [OK]• "General 2 3 4 Setting" menu will appear. Use [A / V] to select "Channel", then press [OK]• "Channel" menu will appear.
CHANNEL SET"IIIII, IN6 You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding channel channels. is only available for the analog TV Make sure • You perform "Auto Channel deleting the channels. Scan" before adding or 1 2 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels• Press [SETUP] and use [A /V] © to select "General Setting", then press [OK]. "General 3 4 ......
CHAN N EL SET 'IIIIIi NG E__r._Tolc5 5 ID][_II f:_ q Select the channel number to add or delete• • Use [CHANNEL Jr" / m] to cycle through the memorized channels. only 5 • Use [<1/1_] to cycle through all the channels including the ones not memorized. • Use [the Number directly. • When a memorized buttons] to select a channel displayed number) in the parenthesis 6 "Delete", channel 4- / to cycle through channels. i] • Use [the Number only buttons] to select a channel directly.
Set the clock before you try the timer programming. If a PBS (public broadcasting station) follow "Auto Clock Setting" below. If not, follow "Manual Clock Setting" on page 32. This unit can set the time and date automatically referring to a PBS station. Make sure • The antenna/cable TV connections in your area, by © select "General Setting", then press Press [SETUP] and use [A /V] to [OK]. are correct. • Channels are set. (Refer to page 28.
SET 711, IN Q "11111i" H E CLO CK select "General Setting", then press Press [SETUP] and use [A / V] to [OK]. "General 2 3 4 5 Setting" When "Daylight Saving Time" is "ON", the unit clock will automatically adjust the time in order to fit the daylight saving time. "ON (MAR - NOV)" has been selected as the default. menu will appear. Use [A / V] to select "Clock", then select "General and Setting", press Press [SETUP] use [A then /V] to [OK]. press [OK]. "Clock" menu will appear.
About digital Youcaneasily switch theanalog TV(NTSC) anddigital TV (ATSC) withtheremote control. Press [DTV/TV] on the remote • The analog mode and digital TV broadcasting: With its high definition broadcast, digital broadcasting surpasses analog broadcasting in both its picture and sound quality. What is the minor channel? By using high compression technology, digital broadcasting offers a service that enables multiple to send simultaneously. control. mode switch alternately.
_'11111i _UNER SET_'IIIIIi_ NGS This section describes recorded. how to switch the TV audio. When you record a TV program, 1 only the audio selected here will be Press [AUDIO] to cycle through available audio languages• C_i_i_!!::::i __!Ji:::::i!i!iii:::ii_,_ __i:::iiiiii::::,:ii _i iiiiii::i:':i:_ii_:i_:!ii:ii_i!_ iii _ • When you press [AUDIO], selected will be displayed on the TV screen. • Every time you press [AUDIO], will be switched. e.g.
TUNER SET_'IIIIIF_NGS 1......................... © _s select "General Setting", then press Press [SETUP] and use [A /T] to [OK]. "General 2 ii!!i ¸¸¸ i _U_'I50id_,ii! ¸%ii)i0 ii 3 4 Setting" menu will appear. Use [A / V] to select "Channel", then press [OK]. "Channel"menu will appear. Use [A / V] to select "TV Audio Select", then press [OK]. © Use [A / V] to select "Stereo" & or "SAP", then press [OK]. Stereo: Outputs main-audio. SAP (secondary Outputs 5 audio program): sub-audio.
TUNER5ET'IIIIFINQS Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. select "General Setting", then press Press [SETUP] and use [A /T] to [OK]. "General 2 3 SettJng" menu wJll appear. Use [A / V] to select "Display", press [OK]. then Use [A / V] to select "DTV CC", then press [OK]. 4 Use [A / V] to select "Caption then press [OK]. 5 Use [A / V] to the desired DTV closed Service", caption, then press [OK].
TUNER5ET'IIIIII'INGS Digital TV can also change the style of its closed caption such as font, color ....... or size,etc. © select "General Setting", then press Press [SETUP] and use [A /T] to [OK]. "General 2 3 Setting" menu will appear. Use [A / V] to select "Display", press [OK]. then Use [A / V] to select "CC Style", then press [OK]. © £ i]1 i SIll then Use [Apress / V] [OK]. to select "User Setting", IQ [OK]. Use [A / V] to select "ON", then press 7,/_i £ _6 ON EN 37 ..........
'11111i NER SET 'IIIIIi N65 6 Use [A / V] to select the item and description None for each item is shown Font size of the displayed switched as below.
Before you make a recording, read the following information. This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. You can select a recording mode among 6 options, and the recording time will depend on the recording mode DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times. DVD-RW/-R will be recorded in the DVD+VR mode you select as follows. automatically in this unit.
You can set a specified Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with "Make Recording Compatible" set to "ON", the title menu is automatically converted to our style. time for chapter 1) Press [SETUP] and use [A/V] Setting", then press [OK]. "General Setting" to select "General menu will appear.
Follow the steps to record TV programs. Press [DVD] first. 1 Insert a recordable disc (refer to page 26 on how to insert a disc)• Make sure the disc is compatible with this unit. (Refer to page 39 for the list of compatible discs.) © • When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format. • If titles have been recorded on the disc, the title list is displayed. Press [STOP II] to exit the title list. i% 2 i....................
"O" will be displayed 5 for 4 seconds. Press [REC] to start recording• Press [STOP I] to stop recording• The recorded title will appear in the title list. (Refer to "Guide to a Title List" on page 70.) e.g.) DVD+R ii _ Press [PAUSE I I] to pause recording. Press [PAUSE I I] or [REC] again to restart recording. To set one-touch timer recording (OTR)... This is a simple way to set the recording of 30 minutes.
You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, Display make sure • Set the clock before • Insert a recordable Guide to Timer Programming setting a timer disc with enough programming. recordable space.
'IIIIIi ER M RECORDING 4 Use [A /V /
"IIIIF MER RECORDING number 2-6 press, press [1_] or [ • ] to decide the channels. will be decided as soon as you enter the channel number. Analog TV For channel the channel Analog For channel number 1-12 press, press []1_] or [ • ] to decide the channels. For other channels 125), the channel will be decided as soon as you enter the channel number.
°'F MERREC©RD NG • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • Ira disc is not inserted, "DVD" on the front panel display flashes and timer recording cannot be performed. In some cases, _ will appear momentarily around the start time as the unit attempts to record. Please insert a recordable disc.
You can overwrite the existing 1) Press [STANDBY-ON title from the beginning. O]. You can overwrite position. the existing title from the selected © 1) Follow the steps 1, 2 and 4 on the left. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten. 2) Use [A / V] to select "Play", then press [OK]. Playback will start. 3) Press [PAUSE I I] at the point from which you want to start overwriting. Title list will appear.
OV£R%RI"I'IIQ QII £C£SSARY "[I"I'L£ When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point. [] When overwriting tile is shorter than the existing tile: (overwriting from the beginning of the title) ] 30 - 180 seconds will be cut off. /\ tile [] When overwrit
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear). Use S-video or the RCA audio/video cables for this connection. © rEm7 external device (camcorder, VCR etc.) cable cable cable RCA audio cable i% i.................... or front of this unit __ rear of this unit 3 4 Use [A / V] to select "Video then press [OK].
5ETIIIIIi=INQ5FOR AN EXTERNAL Before recording from an external device, refer to the instructions for the connection on page 49. 1 DEVICE Press [DVD]. Insert a recordable disc (refer to page 26 on how to insert a disc)• Press [VCR]. Insert the cassette tape with erase-protection tab intact• 2 an Select the appropriate external channel (L1 or L2) by pressing [SOURCE] or [CHANNEL + / --]. • If the external device is connected input to the rear of this unit, select L1.
You can copy contents in a DVD to a cassette tape, or do vice versa. This function is available only when the contents are not copy-protected. (Before you start, refer to page 39 for the list of compatible discs.) Preparing for dubbing (cassette tape to DVD): • Insert a cassette tape to be dubbed. • Insert a recordable DVD. • Make sure there is enough space on the DVD. Preparing for dubbing (DVD to cassette tape): • Insert a disc to be dubbed.
B_o©_BECT_©NAL ©UBB_NG then Use [Apress / V] [OK]. to select "VCR ,_ DVD", 4 Use [A / V] to select "DVD ,t_VCR", then press [OK]. VCR _ DVD DVD _ VCR Press [SETUP] to exit. Press [SETUP] to exit. 5 6 Press [VCR], then press [PLAY I_] to find the point where you wish to start dubbing. 7 Press [DVD], then press [REC MODE] repeatedly to select the desired recording mode. 8 9 Press [D.DUBBING]. Press [PAUSE I I] when you come to the desired start point. VCR to DVD duplication will start.
To prevent accidental titles, you can protect recording, editing or erasing the them from "Disc Edit" menu. 1 2 3 Press [SETUP]. © Use [A / v] to select "Disc Edit", then press [OK]. Use [A / V] to select "Disc Protect OFF ,_ ON", then press [OK]. e.g.) DVD+RW i ]i i_i i.................... I i iii C [OK]. Use [A / V] to select "Yes", then press A disc will be protected.
You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players. Finalizing may take several minutes A shorter recording period up to an hour. on the disc will require longer time period for finalization. power cord during finalization. 1 Press [SETUP]. a Do not unplug the press [OK]. Use [A / V] to select "Disc Edit", then "Disc Edit" menu will appear. press [OK]. Use [A / V] to select "Finalize", then [OK].
PLAYING "I'HE DISCS ON OTHER DVD PLAYERS select "General Setting", then press Press [SETUP] and use [A /T] to [OK]. You can finalize discs automatically using this function. You can use this function to finalize discs after finishing timer recordings and at the end of the disc space. "General Setting" © menu will appear. 2 3 4 Use [A / V] to select "Recording", then press [OK]. 5 Use [A / V] to select "ON", then press [OK]. "Recording" Use [A / V] to select "Auto Finalize", then press [OK].
Before you play back DVD, read the following information. This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following Iogos will play back on the unit. Other disc types are not guaranteed to play back. The following discs will not play back on this unit.
INFORMATION You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.1.1 and ver. 2.0 of video CD standard with PBC function. Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD. Ver.2.0 (with PBC function): While using a video CD with PBC function, "PBC" appears on the TV screen. ON PLAYBACK The contents of DVD are generally divided into titles.
Press [DVD] first. 1 Insert a playable disc (refer to page 26 on how to insert a disc)• n the disc to the disc tray guide. Make sure the disc is compatible with this unit. (Refer to page 56 for the list of compatible discs.) 2 Press [PLAY I_] to start playback. If you are playing back a DVD-video or video CD with PBC function, a menu may appear. Refer to "Using the Title / Disc Menu" 61. 3 ote_ ,m, (OU ca ec" ctr II 58 EN on page Press [STOP II] once to stop playback temporarily.
BASIC PLAYBACK .@/: ABC DEF i ........................ If you want to see disc information, press [_ql ] when the first page of the title list is displayed or press [ • ] when the first title is selected but not when "Play", "Edit" or "Overwrite" is highlighted. © e.g.) DVD+RW D i......................... e.g.)DVD+R © Z IQ Press [DVD] first. 1.
BASIC PLAYBACK Press [DVD] first. 26 on how to insert a disc)• Insert a playable disc (refer to page * Make sure the disc is compatible with this unit. (Refer to page 56 for the list of compatible discs.) When an audio CD is inserted, track list will appear. When a CD-RW/-R with MP3/JPEG files is inserted, file list will appear. When you insert a CD-RW/-R mixed with MP3/JPEG files, the playback media selection screen will be displayed. For MP3, select "Music", for JPEG, select "Photo".
BASIC PLAYBACK The Picture CD is a service to convert photographs taken by a conventional film camera into digital data and write the data on a CD. You can enjoy picture images on the TV set by playing back the Picture CDs. For details of Kodak Picture CD, contact provides developing a shop that service of Kodak Inc. ....... DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc.
You can play back from where you stopped the disc last. 1)During playback, playing back press [STOP I]. You can skip TV commercials to enjoy the recorded programs without interrupting. The resume message will appear. During playback, press [CM SKIP]. Normal playback will start at 30 seconds ahead from the point you press [CM SKIP]. 2)Press [PLAY I_]. In a few seconds, playback will resume from the point at which it stopped last.
SPECIAL PLAYBACH 1)During playback, ...... press [PAUSE I I]. Playback will be paused and sound will be muted. 1)During playback, display menu. 2) Press [IDHN]repeatedly. press [DISPLAY[ © to bring up the Playback will advance one frame (or step) at a time when you press [Im,l_l] with the sound muted. 2) Use [_1 / I_] to select _ menu. To play back step by step backward: to display the selection Press I]_1_1]repeatedly.
SPECIAL PLAYBACK Available This feature allows you to assign a specific point to be called back later. on a disc 1)During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 2) Use [_1 / I_] to select ,_ to display the marker list. e.g.) DVD-video repeat function may vary depending the discs. 1)During playback press [DISPLAY] to bring up the display menu, then proceed to step 2), or press [REPEAT] then proceed to step 3).
S?ECIAL PLAYBACK { You can play back a disc randomly back in the original order. instead of playing You can program order. the disc to play back in your desired © 1) Press [SETUP]. 1) Press [SETUP]. 2) Use [A /V] to select "DISC Playback press [OK]. "DISC Playback Mode" Mode", then menu will appear. For MP3, use [A IV] to select "Music", then press [OK]. For JPEG, use [A IV] to select "Photo", then press [OK]. 3) Use [A /V] to select "Random Play", then press [OK]. Random playback will start.
Using [1_1_] / [IHH] Using [1_1_I]/ [I_IH] 1) During playback, press [1_1_1]to skip the current title or chapter and move to the next. 1) During playback, press I_t] to skip the current track/file and move to the next. The title or chapter • If there will move forward is no chapter by one at a time. in one title, the current title will be skipped. To go back to the beginning chapter, press [1_]. of the current title or The track/file will move forward To go back to the beginning press I]_].
1)During playback, display menu. press [DISPLAY] If the display menu is already to bring up the © shown, skip to step 2. 2) Use [<1 / I_] to select _@_, then press [OK]. e.g.) DVD-video D i......................... e.g.) audio CD © IQ The number next to _ will be highlighted. To move to the number next to _, When time search is not available, counter are not displayed. _ !1 Press [I_].
You can select the format of audio and video as you prefer depending DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch playback. subtitle languages 1)During playback, display menu. press [DISPLAY] anytime during on the contents of the disc you are playing back. When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback.
SELECTIHG °/°HEF©BMAT AU©I© AND VI©E© _(_ Some DVD-video angles. Angle You can enjoy stereophonic virtual existing 2 channel stereo system. 1)During playback, space through press [DISPLAY] display menu. If the display menu is already your to bring up the shown, skip to step 2. the disc contains should multi-angle 1)During playback, display menu. be on the disc case if © scenes. press [DISPLAY] 2) Use [_1 / I_] to select _, to bring up the then press [OK]. e.g.
Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [DVD], then press [TITLE]. You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original. Deleting a Title (Refer to page 71 .) Putting Names on Titles (Refer to page 72.) Setting Chapter Marks (Refer to page 73.) Clearing Chapter Marks (Refer to pages 74-75.
You can delete a title which you do not need anymore. Please be advised that the titles once deleted cannot be brought )ress [OK]. Use [A / V] to select "Edit", back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the then © title list is deleted, the available disc space to record on will be increased. For DVD+R/DVD-R, the disc space to record on will not be changed. Ii Ii Ii D 4 Use [A / V] to select "Title Delete", then press [OK]. i.........................
E© You can put title names on the titles and change names from this menu. NG © SCS the [OK]• Use [A / V] to select "Yes", then press The name you entered will be activated for the title. iii:: ¸ ::i !: fill ii iii!i_i press [RETURN] to exit• After this operation is completed, Data will be written onto the disc momentarily. 1)Use [A /V] to select a desired press [OK].
E©[/°IH6 ©ISCS You can put chapter marks in each title. Once a chapter marked, you can use it for the chapter search feature. ...... is Title" on page 71 to display "Edit" Follow steps 1 to 3 in "Deleting a menu. then press [OK]. Use [A / V] to select "Chapter Submenu 3 © Mark", will appear. Press [PLAY I_] and then [PAUSE I I] D to decide the point at which you will create a new chapter mark.
E© ii _ii: _ii!: i_iii¸ ......... NG D SCS 1 2 3 Follow steps 1 to 3 in "Deleting a Title" on page 71 to display "Edit" menu. Use [A / V] to select "Chapter then press [OK]. Submenu Mark", will appear. Use [1_1_I]/ [IHH] to select a chapter mark to be deleted, then press [PAUSE I I]. Chapter preview mark number screen. is displayed on the e.g.) DVD press [OK]. Use [A / V] to select "Delete", then [OK].
E©[/°IH6 DISCS To delete all chapter marks: © Title" on page 71 to display "Edit" Follow steps 1 to 3 in "Deleting a menu. D then press [OK]. Use [A / V] to select "Chapter Submenu Mark", will appear. i......................... then press [OK]. Use [A / V] to select "Delete All", © [OK]. Use [A / V] to select "Yes", then press LI:_ [OK]. Use [A / V] to select "Yes", then press II 7,/_i _6 All chapter 6 marks will be deleted. Press [RETURN] twice to exit.
E© °'F NGD SCS You can hide chapters Hidden chapters from the title list. are skipped during playback. 1 2 3 4 Follow steps 1 to 3 in "Deleting a Title" on page 71 to display "Edit" menu. Use [A / V] to select "Hide Chapter", then press [OK]. Submenu will appear. Use [1_1_I]/ [I_H] to decide the chapter to be hidden. Use [A / V] _i_ "Hidden", then _!!! iii_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_ The chapter 5 to select )tess [OK].
E©I°'[IH6 DISCS You can set your desired title. scene as a thumbnail for each Title" on page 71 to display "Edit" Follow steps 1 to 3 in "Deleting a menu. i]i i il iii!i! 2 © Use [t<1<1, [IHIH], [,<1<11, [IHI_], [PAUSE I I] and [PLAY I_] to decide the picture you want to select as a thumbnail. D i_iiiiiiiiii !:iiiiiiiiii i i!i!i!i!i! i iiiii i i iiiiiiiiii i iiiii then Use [Apress / V] [OK]. to select "Index _ Picture", [OK].
You can divide one title into 2 new titles. Title" on page 71 to display "Edit" Follow steps 1 to 3 in "Deleting a menu. I I] and [PLAY I_] to decide the point Use [t<1<], [IHIH], [,<1<1],[IHI_], [PAUSE at which you will divide the title. then press [OK]. Use [A / V] to select "Title Dividing", [OK]. Use [A / V] to select "Yes", then press !iiiiiiiiii The title will be divided into 2 new titles. Both title names are identical, and thumbnails are reset to the first scene at this point.
E© You can put a name on the disc and change menu. H6 DISCS it from this I Press [STOP II] 1 if you are playing back a disc. Press [SETUP]. © press [OK]. Use [A / I'] to select "Disc Edit", then Name", then press [OK]. Use [A / V] to select "Edit e.g.) DVD+RW Disc D i......................... © & A window for entering a title name will appear. I o, 4 To enter a disc name, follow the steps of "Guide to Edit Title Name" on page 72. When you finish entering [OK].
E© You can erase all titles on a disc. H6 ©_SCS Press [STOP II] if you are playing back a disc, ] on Disc" on page 79 to display "Disc Follow steps 1 to 2 in "Putting Name Edit" menu. 2 Use [A / V] to select "Erase Disc", then press [OK]. e.g.) DVD+RW iiil ii_iI i _iiii i _ii_i_i_i_i_i_i_i_i_i_i_i _ _ x x x x x x x x x x x x x x x x x x [OK]. Use [A / V] to select "Yes", then press _i_,i!}_C,3_ C3__iiiliiiiiiii!i!13 _ Data will be written The contents 8O EN onto the disc momentarily.
E©[/°IH6 DISCS If you have added or deleted chapters, or made chapters hidden, you must perform "Make Edits Compatible" to see those effects on other unit. ....... I Press [STOP III] if you are playing I back a disc. © on Disc" on page 79 to display "Disc Follow steps 1 to 2 in "Putting Name Edit" menu. 2 Use [A / V] to select "Make Edits Compatible", then press [OK]. D i......................... © & [OK].
The following table is the contents which you can set and the default setting. Refer to the following table for useful operation. | |_ Playback Pages 85-87 | | _uj._ll_, Parental i | | w i_! q | L-i° Disc Audio Set the parental Dynamic Control Dolby Disc Menu Audio Subtitle L-I r- i, i | q Lock Range Compressing Digital level for DVD playback. the range of sound volume. Set the type of sound signal which outputs from the digital audio output jack.
LI5"IIIIF 0 F SET"IIIIF _NQS Display Pages 88-90 CC Style _ pages 37-38 Font Color Set the font color of the displayed caption. © © © V-Chip TV Rating Set the viewing limitation program ratings. Canadian Set the viewing limitation according Canadian English language ratings. to Set the viewing limitation according Canadian French language ratings.
LIS"IIIIF 0 F SET"IIIIF _NQS Video Video Page 91 Input Page 49 LI (Rear) Set the video input type for the external input L2(Front) Recording Page 55 End of Timer Rec Set the dubbing Set to prohibiting additional recording (OFF) or to replace the title list after recording (ON). Page 40 Clock _ Pages 31-32 Clock direction.
Press [STOP I] if you are playing I back a disc. © select "General Setting", then press Press [SETUP] and use [A /V] to [OK]. .@/: ABC GHI JKL MNO TUV WXYZ "General SPACE CLEAR 2 Setting" menu will appear. Use [A / V] to select "Playback", press [OK]. then D i......................... © £ then press [OK]. Use [A / V] to select a desired item, Parental Lock Submenu 4 5 will appear. _Q Refer to [] to [] on pages 86-87 and set the selected item.
Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [A / V] to select the desired level, then press [OK]. OFF Choose the appropriate device. audio setting for your external It will only affect a disc playback. Use [A / v] to select a desired item, then press [OK].
_1Dolby Digital (Default : Stream) Use [A / V] to select a setting, If "Other" is selected using [the Number then press [OK]. for [] to [], press 4-digit code buttons]. © Stream Your setting PCM Stream will be activated. : Converts the Dolby Digital into PCM (2 channel). When your amplifier/decoder is NOT compatible with Dolby Digital, set to "PCM". : Outputs Dolby Digital signals When your amplifier/decoder is compatible with Dolby Digital, set to "Stream".
Press [STOP II] if you are playing back a disc. ] select "General and Setting", press Press [SETUP] use [A then /T] to [OK]. .@/: ABC DEF JKL MNO .................. press [OK]. Use [A / V] to select "Display", 3 then Use [A / V] to select a desired item, then press [OK]. OSD Language Selection 4 5 menu will appear. Refer to [] to [] set the selected • For [] and [] on pages 88-90 and item. refer to pages 36-38. When you finish with setting, press [SETUP] to exit.
1 MPAA Rating Set the front panel display brightness. Use [A I V] to select a setting, then press [OK]. You can choose one from "Auto", If "Auto" is selected, the display power is in the standby mode. "Bright" and "Dark". gets dark when the With the V-chip system in this unit, you can set the viewing limitation for the analog/digital TV programs received from the tuner or recorded on DVDs to prevent your children from watching inappropriate programs.
Canadian French Rating] l Downloadable Rating Rating l Category 18 ans+ Adult audience only higher 16ans+ Unsuitable for ages under 16 13 13 ans+ Unsuitable for ages under 8 ans+ Unsuitable for ages under 8 G General E Exempt program _, _ audience Set the rating system via digital broadcasting, or clear the downloaded ratings. If the broadcasting signal does not have the downloadable rating information, the message below will appear.
This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to "ON". 1) Use [A /V] to select "ON", © then press [OK]. D 2) Use [_1/I_] to select "Yes", then press [OK]. i......................... © £ :W '¸ iii:!Z:i!iiiii/i ¸¸¸¸ iiZi!i!:ii:!:ii i'::C:ii I Press [STOP l] if you are playing 3) Use [A / V] to select "Yes" within press [OK].
3 Use [A / V] to select a desired item, 4 When you finish with the setting, press [SETUP] to exit. then press [OK]. Format You can select the color space for HDMI output. Set the appropriate color space for your display device. Use [A / V] to select a setting, then press [OK]. •When the connected device is not compatible with the Y/Cb/Cr, HDMI signal is output as RGB regardless of the setting. Your setting will be activated.
Reset the setting to default. select "General Setting", then press Press [SETUP] and use [A /V] to [OK]. "General 2 3 Setting" © menu will appear. Use [A / V] to select "Reset All", then press [OK]. D Select "Yes" using [A / V], then press [OK]. i......................... © 4 Select "Yes" again using [A / V], then press [OK]. Your setting in recording will be initialized.
Caution on using S-video, component, • Only the playback or HDMI audio / video are available connection for VCR: with these connections. • Under the condition listed below, the playback image cannot be viewed. Use the standard video connection, - during DVD recording. • HDMI video resolution cannot be changed in such case; when the unit is in VCR mode. Press [VCR] first• Press [VCR] first• 1)Insert a prerecorded tape (refer to page 26 on how to insert a cassette tape).
VCR FUIC"I'IOI5 ........ | This feature allows you to set the recording by pressing [REC] on the remote length simply control. An index mark will be assigned at the beginning recording you make. You may skip to a specific point by following the steps below. of each marked © Press [VCR] first. Press [VCR] first. 1)Insert a recordable tab intact. 1) Press [SEARCH] so that "INDEX tape with an erase-protection 2) Select the recording SEARCH" menu appears. mode using [REC MODE].
VCR FUNC°'IIIII.IONS This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Press [VCR] first• Fast forward: When the unit is in stop mode, press [1_1_] to fast forward the cassette tape. Press [VCR] first• 1) Press [SEARCH] repeatedly so that "TIME SEARCH" menu appears. Rewind: When the unit is in stop mode, press [,91_1]to rewind cassette tape.
Before requesting service for this unit, check the table below for a possible Some simple checks or a minor adjustment The power does not turn on. • • • • TV program TV screen. reception TV program pictures cannot cause of the problem the problem and restore does not fill the are distorted. • Try to set the channels with "Auto Channel Preset" or "Manual Preset" in "Channel" menu (pages 28-30). • Select a channel of any TV program using [CHANNEL J_/--]. • • • • be changed.
"IIIIIi'IOUBL HOOTINQ • Check the HDMI connection. indications.) No image from HDMI connection. (Check the status of the HDMI related • Check whether the connected monitor device or other device supports HDCP. (This unit will not output a video signal unless the other device supports HDCP.) • Check the setting of HDMI. • Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of other connected device.
"IIIIIi'IOUBL MOOTING ........ The disc tray does not open when you press [OPEN/CLOSE_]. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. This is because the unit is adding disc data to the disc. "Repairing" • If there is a formatting process will It may take appears on the TV screen. In a case you intend repairing process. to cancel the D 1 Picture noise appears. • Head cleaning (page 4). for VCR may be necessary.
"IIIIIi'IOUBL HOOTINQ Disc Error -- Please eject the disc. -Playback feature may not be available this Disc. • Unplayable disc is inserted in the unit. • The disc is upside down. on • Insert the standardized disc which the marks on page 56. • Insert the disc with the labeled • Playback is not authorized in the region of the DVD-video which you inserted in the unit. • Insert the DVD-video 1 or ALL. Parental Lock On The current selected prohibits playback. • The current selected prohibits playback.
Abkhazian 4748 Hungarian 5467 Russian 6467 Afar 4747 Icelandic 5565 Samoan 6559 Afrikaans 4752 Indonesian 5560 Sangho 6553 Albanian 6563 Interlingua 5547 Sanskrit 6547 Amharic 4759 Interlingue 5551 Scots Gaelic 5350 Arabic 4764 Inupiak 5557 Serbian 6564 Armenian 5471 Irish 5347 Serbo-Croatian 6554 Assamese 4765 Italian 5566 Sesotho 6566 Aymara 4771 Japanese 5647 Setswana 6660 Azerbaijani 4772 Javanese 5669 Shona 6560 Bashkir 4847 Kannada 5760 S
Analo 9 Audio PBC (playback An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also "Digital Audio". This function enables you to play back interactive software using a menu screen. See also "Video CD". Aspect Ratio The width ofa TV screen relative to its height.
VCR video heads Four heads Power requirements 120V AC, 60Hz Power consumption 30W (standby: Dimensions (width x height x depth) Weight 3.3W) 17.2 x 4.0 x 10.3 inches (435 x 99.5 x 260mm) © 9.5 Ibs. ( 4.
Este aparato siguientes es compatible con la reproducci6n de los discos y archivos, Este aparato DVD-R. puede grabar a DVD+RW, DVD+R, DVD-RW y Los discos DVD+R/DVD-R II • -o o® • - pueden vez. Los discos DVD+RW/DVD-RW borrados muchas veces. ser grabados pueden s61o una ser grabados y En este aparato los discos DVD-RW/-R ser_n grabados autom_ticamente en el modo DVD+VR.
cable RCA de audio © cable RCA de video i ee ee o• eee • • ••o0 • ••e •o o• parte trasera de este aparato D Esta conexi6n es s61o para el procesamiento de cada element• de la serial de TV _ / antena de _ 'VHF/UHF M_ i............................ iiiiiii_ _ cable coax_a_ _::JOUT I _ iiiiiiiii de _ I _oo _._J___ ,/ empresa de TV pot cable • HDMI emite las seflales de video / audio sin convertirlas • No es necesaria una conexi6n de audio. cable en seflales anal6gicas.
Cuando usted encienda este aparato necesita seguir estos pasos. por primera vez Presione [OPEN/CLOSE m_] Presione [DVD]. para abrir la bandeja de discos e insertar su disco Presioneel [STANDBY-ON O]. la entrada Encienda televisor. Seleccione la cual est._ conectado 2 con el r6tulo aupntando hacia arriba. Presione de nuevo a el aparato. Utilice [A / V] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo. [OPEN/CLOSE m_] para cerrar la bandeja de discos.
Usted puede programar el equip© para que grabe hasta 12 programas, con un mes de anticipaci6n. Tambi_n hay disponibles grabaciones de programas diarias o semanales. Antes de grabar, aseg_rese • Antes de establecer configure de que una programaci6n 1 Presione [TIMER]• © del temporizador el reloj. • Inserte un disco grabable con suficiente espacio libre o una cinta de cassette con una leng0eta de grabaci6n. L Utilice [A /V] para seleccionar "Prog. nuevo", y luego presione [OK]. temporizador.
MAGNAVOX LIMITED FUNAI CORP. will repair this product, as follows: WARRANTY free of charge in the USA in the event of defect in materials or workmanship DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide original retail purchase.
