Owner's manual
Table Of Contents
- MMC 2 INSTALLATION INSTRUCTION MANUAL
- TABLE OF CONTENTS:
- SELECTION OF SPEAKER LOCATION
- PAINTING SPEAKER FRAMES
- TIPS FROM THE PROS FOR DO-IT-YOURSELFERS
- WALL PREPARATION
- TOP FRAME INSTALLATION
- ATTACHING BOTTOM FRAME TO SPEAKER
- BOTTOM FRAME ATTACHMENT TO WALL
- FINAL SPEAKER INSTALLATION
- Final Adjustments
- HOOKUP
- In case you missed it in the manual-
- SPEAKER ANGLE ADJUSTMENT
- Phasing
- Bass Management and Processor Settings
- Tweeter Level Control
E. ATTACHING BOTTOM FRAME TO SPEAKER
1. Caution-- Do not rest the weight of the speaker panel on the speaker wires. Under extreme force, the steel
tube could cut through the insulation.
2. Lay the speaker on a table with the bottom extending about 12" over the edge of the table.
3. Thread the speaker wires through the bottom frame and insert the bottom pin of the speaker into the pivot
hole of the bottom frame. See Fig. 5 & 6.
Fig. 5
Fig. 6