User's Manual

40
ADVANCED OPTIONS
?
To navigate to the ADV. OP-
TIONS, menu using manual inter-
action, proceed as follows:
Press
ß
/MAIN to open the Main
Menu then select SETTINGS by
pressing SRC/OK or
ß
/MAIN.
Select ADV. OPTIONS and then
press SRC/OK or
ß
/MAIN.
}
Or, using voice interaction:
Press
‘
, pronounce “Settings”
and then “Advanced Options”.
Within the ADV. OPTIONS
menu you can access the SYS
CODE.
Note
This code is an 8-digit number (device ID)
which uniquely identifies the Blue&Me™
system installed on your car and cannot be
changed.
Accessing the device ID
For certain operations, it might be neces-
sary to know the Blue&Me™ system
code.
?
To access the system code by man-
ual interaction, proceed as follows:
Select SYS CODE and then press
SRC/OK or
ß
/MAIN.
The instrument panel display will
show your Blue&Me™ system
code.
Press SRC/OK or
ß
/MAIN or
&
/ESC to quit.
}
Or, using voice interaction:
Press
‘
, pronounce “Settings”,
wait shortly for feedback and then
pronounce “Device ID”.
The instrument panel display will
show your Blue&Me™ system
code.
Press SRC/OK or
ß
/MAIN or
&
/ESC to quit.
Changing the GPRS code
If your mobile phone carrier requires to
change the GPRS code, you can perform
this operation via the ADV. OPTIONS
menu.
?
To change the GPRS code using
manual interaction, proceed as fol-
lows:
Go to the GPRS CODE menu and
press SRC/OK or
ß
/MAIN.
The display will show GPRS:, and a
list of digits (1, 2, 3, 4, 5, 6, 7, 8, 9),
DEFAULT, and DISABLE. To
select the new GPRS code, press N
and O until choosing the required
option, then press SRC/OK or
ß
/MAIN. To store the default val-
ue, select DEFAULT. To disable
the connection code, select DIS-
ABLE.
After setting the new GPRS code,
Blue&Me™ will display the mes-
sage GPRS CODE SET.