User's Manual

Page 42 – February 5, 2009 Edition
www.fordworksolutions.com / 1.800.624.2726 / [e-mail]
Accessing Files on a USB Drive
Follow these instructions to access or copy files from your USB drive to
the in-dash computer.
STEP 1 Insert your USB drive into the USB slot on your in-
dash computer.
STEP 2 Open File Manager from the Applications menu.
STEP 3 To access your USB drive, press or click “Hard Disk”
in the on-screen menu.
STEP 4 To move a file to your in-dash computer, use the
control buttons at the top of the screen. (Buttons
include Copy, Cut, Paste, Delete and Rename.)
STEP 5 Select the “Copy” or “Cut” option. The “Copy”
command will only copy the file from your USB drive,
while the “Cut” command will permanently remove the
file from your USB drive.
STEP 6 Locate the folder on your in-dash computer (called
“User” drive) where you wish to save the file.
STEP 7 Select the “Paste” command from the control buttons
at the top of the screen. Your file will be saved in the
folder currently selected.
Backing Up Files to an External USB Drive
You should back up important files from your in-dash computer to an
external USB drive on a regular basis and/or before having your vehicle
serviced. Follow the instructions below to back up your files.
STEP 1 Insert your USB drive into the USB slot on your in-
dash computer.
STEP 2 Open File Manager.
STEP 3 Locate the folder(s) or file(s) you wish to back up onto
an external drive.
STEP 4 Select the “Copy” button from the control buttons at
the top of the screen.
STEP 6 Access the USB drive (“Hard Disk”) in File Manager.
STEP 7 Select the “Paste” command from the control buttons
at the top of the screen. Your file will be saved on