User's Manual

Page 46 – February 5, 2009 Edition
www.fordworksolutions.com / 1.800.624.2726 / [e-mail]
Setting Day / Night Mode
Day and night settings allow your in-dash computer screen to be adjusted
for better visibility and easier viewing in bright or dark conditions. The
settings available for Day / Night Mode are explained below:
Auto: Select the “Auto” button to allow the system to adjust automatically
between day or night mode. When your vehicle’s headlamps are off, the
system will remain in Day Mode. When your vehicle’s headlamps are
turned on, the system will automatically switch to Night Mode.
If your vehicle is equipped with automatic headlamps, the
day/night mode may not change unless the light sensor
determines that the interior lamps should be dimmed.
Day: Select the “Day” button to keep the system on daylight settings
regardless of the ambient light conditions.
Night: Select the “Night” button to keep the system on nighttime settings
regardless of the ambient light conditions.
Setting Screen Brightness for Day / Night Modes
Two sliders are available on the Display Settings screen – one for Day
Mode and one for Night Mode. Press “<” to decrease the brightness for
the selected setting, or press “>” to increase brightness.
Home Screen (Wallpaper) Image
You can use the Home Screen Image section to change the background
image on your in-dash computer’s home screen. To do so, follow the
instructions below:
STEP 1 Open Applications Mode.
STEP 2 Open File Manager.