User's Manual

SWITCHING THE SYSTEM ON
AND OFF
RADIO (TUNER) MODE
The system is switched on/off by
pressing the ON/OFF and Volume button
fig. 7.
The Connect system stores the last state
(on or off) in memory when the engine is
turned off. So the next time the engine
is started, the system will turn back
on automatically or will remain off
depending on its state the last time the
engine was turned off.
This setting can be changed by enabling
the "Automatic activation" function in the
"SETTINGS” menu.
The electronic volume adjustment
control turns continuously (360°) in both
directions, without stop positions.
Turn the control clockwise to increase the
radio volume or counter-clockwise to
decrease it.
The system is equipped with the
following tuners: AM, FM, DAB and
SiriusXM™ Satellite Radio (where
available).
RADIO MODE SELECTION
To activate the "RADIO" mode, proceed
as
described below; press the MENU
4 fig. 4 button to activate the main menu
fig. 8.
By turning and pressing the Rotary Pad 3
fig. 4, select and activate RADIO mode
fig. 9.
Or, in a menu, open the Multitasking menu
by moving the Rotary Pad upward, turn
it to select the logo
fig. 10 and press
it to activate the function.
This procedure accesses the last screen
active on the previous access.
7
11056S0016EM
8
11056S0001EM
9
11056S0002EM
10
11056S0003EM
13
Connect