User's Manual

MEDIA MODE
AUDIO SOURCE SELECTION
This chapter describes the interaction
modes concerning the operation of
Bluetooth®, AUX and USB/iPod.
Proceed as follows to activate the
"Media function":
press the MENU button fig. 4;
select "MEDIA" mode fig. 24 by turning
the Rotary Pad.
Press the Rotary Pad to activate the
mode fig. 25.
Or, in a menu, open the Multitasking menu
by moving the Rotary Pad upward, turn
it to select the logo fig. 26 and press
it to activate the function.
Within the "MEDIA" mode, rotate the
Rotary Pad until you select the desired
audio source among those available
(up to 2 USB devices, AUX and
Bluetooth® when a device is connected).
With the source activated, the display
shows the following control bar:
PLAY/PAUSE
NEXTTRACK
PREVIOUS TRACK
SHUFFLE MODE / PLAY MODE
TRACK LIBRARY
SOURCE
Going to the or control and moving
the Rotary Pad to the right, accesses
the currently playing Playlist.
RESTART OR PAUSE A TRACK (Play /
Pause)
To restart a track, when the external
device is connected, press the button.
To pause the track currently being
played, press the button.
TRACK CHANGE (previous/next)
To pass to the next track, push the
ON/OFF and Volume control to the right
or press the button on the steering
wheel, or use the control on the
display, which can be selected and
activated by rotating and pressing the
Rotary Pad.
24
11066S0001EM
25
11066S0002EM
26
11066S0003EM
20
Connect