User's Manual

The following settings can be modified
when this mode is selected:
"Automatic activation": allows you to
activate the system upon starting the car;
“Switch-off delay": enables the
system to continue functioning for a
certain period after the car has been
turned off;
"Software Update": allows you to
choose between the following options:
“Current version”; “Update software”;
“Restore software”.
"Maps Update": allows you to choose
between the following options: “Current
version”; “Update map”.
“Clear Personal Data": allows you to
delete all the data that the system stores
after connecting a device (e.g. phone,
MP3 player, etc.)
“Restore Settings” : allows you to
delete the settings from this menu and
restore the default settings.
Enter the single functions and adjust
them by rotating and pressing the Rotary
Pad.
“Map Update” - Procedure
To update the navigation maps, proceed
as described below:
1 - start the engine;
2 - with the vehicle stationary, insert the
USB flash drive that contains the
updated maps into one of the two front
ports fig. 27;
3 - select the “Update Map” option from
within the “Map Update” function. The
display will show a screen with the
version and the duration of the whole
procedure in minutes;
4 - select the “Update” function. The
display will show a screen with the
instructions to be followed and a request
for confirmation;
5 - confirm to start the process.
During the update, the instructions to be
followed will continue to be displayed
together with the process progress. You
can move the car during this phase.
NOTE The map updates are available on
the www.tomtom.com/support website.
APPLICATIONS
To access the "APPLICATIONS" functions
open the main menu by pressing the
MENU 4 button fig. 4, then select by
turning and pressing the Rotary Pad.
The following settings can be modified
when this mode is selected fig. 59:
My Car
Allows to display information regarding
the state of the car. The possible options
are:
“Tyre pressure/Carbon ceramic brakes
status (where provided)": repeats the
“Tyre pressure” function screens on the
Connect system display, usually
displayed on the instrument panel in case
of failures fig. 60;
58
11126S0017EM
59
11126S0004EM
45
Connect