User's Manual

PACCAR Display
DRAFT 10/7/2010 12:03 PM Y53-6035 Page 23 of 30
the <–> soft key. The keys allow for 10
incremental adjustments from minimum
to maximum.
Bass – default is the median value and
allows to user to adjust to increase
using the <+> soft key and decrease
using the <–> soft key. The keys allow
for 10 incremental adjustments from
minimum to maximum.
The balance fade keys allow the user
to adjust the balance and fade of the
system while also receiveing a visual
feedback on the “center” of the audio
image. Pushing the <↓> arrow biases
the system towards the rear of the
vehicle while pressing the <↑> arrow
biases the system towards the front of
the vehicle. The buttons allow for 20
incremental adjustments from front to
rear.
Pressing the <←> arrow biases the
system towards the left hand side of
the vehicle (North American driver’s
side) whicle pressing the <→> arrow
biases the system towards the right
hand side of the vehicle (North
American passenger’s side). The
buttons allow for 20 incremental
adjustments from left to right.
All of the halos and buttons remain
default grey. The buttons will have an
amber halo while being selected but
will return to a default grey halo when
not selected.
The buttons in this menu only react
when they are touched. There is no
hold-down capability.
Language
Image 76 – Language Setup Screen
The language setup screen allows the
user to change the system language.
The language translation is defined in
Appendix 10.4 Language Translations
(except for the Garmin Navigation
environment).
The language setting that is currently
active will have the halo illuminated in
amber. The non-active settings will
have a default grey halo.
Clock
Image 77 – Clock Setup Screen