User's Manual

PACCAR Display
DRAFT 10/7/2010 12:03 PM Y53-6035 Page 29 of 30
The selectable options are:
Modem Info
System Preferences
Connection & RF
Data Settings
Advanced
Factory Defaults
The values for the selected option will
appear in the Bottom Left Box.
The modem firmware version will be
display when Modem Info is selected.
In Configurable Parameters the
selectable options are based on valid
MSL:
MDN
MSID
Home – SID & NID
When user selects one of the
Configurable Parameters options, two
text boxes and list box in the right side
will populate the respective data.
Press <UPDATE> button.
This will update any of those fields
above and is purely a diagnostician
step. The customer should never have
a need to go here without instruction
from a Sprint Tier 2 support person.
The <UPDATE> button will only be
active for certain configurable
parameters.
MSL Box:
MSL = Master Subsidiary Lock (Unlock
code; unique to ESN)
To perform manual activation:
1. Press the box above <VERIFY
MSL> soft button.
2. A keyboard will pop up.
3. Enter the MSL number and press <
VERIFY MSL> soft button.
4. The system will reach out to the
network and try to activate on the
network.
If MSL verifcation failed, a message
would appear. “Failed”
If the “Verify MSL” is successful, the
configurable fields will be filled in.
If failed, a message would appear.
“Failed”
If <VERIFY MSL> button is not
pressed, user will not be able to do
anything on this screen.
Reverse Tunneling: These check
boxes should not be used by
customers unless directed.
MEID and MSID will be populated in
the filed boxes directly right to the field
where they will show up in the dialogue
boxes below MSL field once the MSL is
correctly entered. This is a Tier 2
support activity.
Press <CANCEL> soft button.
The screen returns to MODEM screen