rca.
Important Information W WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
Important Information IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Introduction Thank you for choosing RCA Congratulations on purchasing this RCA High Definition Television (HDTV). Your purchase decision represents an investment in a new generation of technology—HDTV. Even though this is a technologically advanced HDTV, it is the most user-friendly of its kind—with on-screen instructions that guide you through all of the TV’s features. Connect the off-air antenna for digital television to this input jack.
Introduction A regular, analog television only has a resolution of about 200,000 pixels (480 vertical pixels x 440 horizontal pixels = 211,200 pixels). The HDTV format is capable of more than 2 million pixels (1,920 x 1,080 = 2,073,600). More pixels equal more detail.
Introduction Other Key Features of owning an RCA HDTV There are other HDTVs on the market. But your RCA HDTV has been designed with features that will enhance your TV viewing experience, and features that provide flexibility to build on the digital revolution that is taking place. A summary of your TV’s most unique features follows. Go to Chapter 3 for more details on these and additional features.
Table of Contents Important Safety Instructions .......................................................................................... 1 Introduction....................................................................................................................... 2 The best of both worlds ............................................................................................. 2 What makes HDTV better ..........................................................................................
Table of Contents Chapter 3: Using the TV's Features........................................................ 29 Channel Banner ............................................................................................................... 30 Digital and Analog Tuners .............................................................................................. 31 Digital Channels ........................................................................................................
Chapter 1 Connections & Setup Chapter Overview: • Things to Consider Before You Connect • Choose Your Connection • Explanation of Jacks • Connection Instructions • Front Panel Buttons and Jacks • Plug in the TV • Put Batteries in the Remote • How to Use the Remote Control to Complete the Initial Setup • Turn on the TV • Complete the Initial Setup Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet. • Turn off the TV and/or component before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions on page 1. Protect Components from Overheating • Don’t block ventilation holes on any of the components.
Connections & Setup Choose Your Connection There are several ways to connect your HDTV. Please use the following chart to determine which connection is best for you. Proceed to the appropriate page and connect your HDTV. Note for US customers: I , A S R . F , 1-888-206-3359. Components Cables Needed Video Connections Coaxial Audio/video TV DVD Connection Title Go to...
Connections & Setup Explanation of Jacks This section describes the jacks you can use for connections. There are several ways to connect components to your TV. Back Panel Jacks (in alphabetical order) ANTENNA/CABLE ANALOG INPUT Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or a VCR. This input jack is for analog signals only. ANTENNA DIGITAL INPUT Lets you connect the coaxial cable from an off-air antenna to receive the off-air digital signals.
Connections & Setup COMPONENT INPUT CMP1 COMPONENT INPUTS Lets you connect a component video source, such as a DVD player. • CMP1 Y PB PR (Component Video) Provides optimum picture quality because the video is separated into three signals. Use three video-grade cables for the connection. When using CMP1 Y PB PR, make sure to connect left and right audio cables to the CMP1 L and R Audio Input jacks. • CMP1 L (Audio) Provides left audio connection. The left audio connector is usually white.
Connections & Setup COMPONENT INPUTS CMP1 Y DVI-HDTV L R 12 CMP2 COMPOSITE INPUTS S-VIDEO Y PB L PB L PR R PR R V R V R VID1 AUDIO/VIDEO OUTPUT V VID2 VARIABLE AUDIO FOR FACTORY USE ONLY SUBWOOFER FIXED AUDIO L R L R Chapter 1
Connections & Setup TV + DVD + VCR 1. Connect your DVD Player to your TV. A. Connect the audio (white and red) cables to the CMP1 L and R audio input jacks on the back of the TV and to the audio output jacks on the DVD player. B. Connect three video grade cables to the CMP1 Y PB PR jacks on the back of the TV and to the Y PB PR jacks on the DVD player. Notes: I DVD TV I S-V DVD Y PB PR . , S-V S-V , , VID1 S-VIDEO VID1 V (V ) TV .
Connections & Setup 14 Chapter 1
Connections & Setup TV + Satellite Receiver + VCR 1. Connect your VCR to your TV. A. Connect a coaxial cable to the VCR’s antenna output jack and to the ANTENNA/CABLE ANALOG INPUT jack on the TV. B. Connect the audio (white and red) cables to the VID2 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on the VCR. C. Connect the video cable to the VID2 V (Video) jack on the back of the TV and to the video output jack on the VCR. 2.
Connections & Setup 16 Chapter 1
Connections & Setup PHONES Allows you to connect headphones to listen to the sound coming from the TV. To adjust volume control of the headphones, press the VOL+ or VOL- button (the volume display appears). Press the arrow up or down button (the headphone volume display appears), then press the right or left arrow button to adjust the headphone volume. VIDEO (in) Receives video from another component, such as a camcorder, video game console, or VCR.
Connections & Setup 18 Chapter 1
Connections & Setup Chapter 1 19
Connections & Setup Changing Lists and Labels Go back Channel number In channel list Channel label The List & Labels part of the setup lets you edit your channel list and choose or create a personal six-character label for each channel. 113 ESP_ _ _ Note: C L L .Y S Enter the channel number or use keys. 1. . Press the left or right arrow button to scroll through the channels and choose the one you want to edit. Note: L .I , ANT CAB . 2.
Chapter 2 Using the Remote Control Chapter Overview: • The Buttons on the Remote Control • Programming the Remote to Operate Other Components • How To Use the Remote After You’ve Programmed It • Volume Punchthrough Feature • Using the INPUT Button • Remote Code List Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the Remote Control The Buttons on the Remote Control ON•OFF TV AUX•HD STOP P PAUSE (0-9) Number Buttons Enter channel numbers and time settings directly through the remote control. To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the 1 button until 1 and two dashes (– –) appear, then add the second two digits.
Using the Remote Control GO BACK Returns you to the previous channel. GUIDE Brings up the Channel Guide menu. INFO Brings up the Channel Banner with channel and viewing information. Press again to remove the banner. INPUT Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1, CMP2 and DVI). Press the CH+ or CH- button to resume TV viewing. T T ’ . A MENU Brings up the Main menu. . Note: I ( TV, ). W , . T T T RCA TV, .
Using the Remote Control ON•OFF VCR TV DVD AUDIO AUX•HD SAT•CABLE SA MUTE FORMA FORMAT VOL VOL CH + CH BACKLIGHT GO BACK GUIDE SKIP INFO OK Programming the Remote to Operate Other Components The universal remote can be programmed to operate many brands of remotecontrollable VCRs, audio components, DVD players, cable boxes, satellite receivers and other components. In addition to being programmed to operate your television, it’s already programmed to operate most RCA components.
Using the Remote Control At this point the remote control is searching for the correct code to program, so keep pointing it at the component. If, after five seconds, the component you want to control does not turn off, press and release PLAY again to tell the remote to search the next set of codes. Continue pressing and releasing PLAY until the component turns off or until the all of the component buttons on the remote flash 4 times in unison.
Using the Remote Control Modes of Operation Note S ’ , ’ . ’ Because this universal remote can control several different components (DVD player, VCR, cable box, etc.) it uses operational modes triggered by the component buttons. For example, if you want the remote control to operate the TV, press the TV button to put the remote into TV mode. If you want the remote to operate the VCR, press the VCR button.
Using the Remote Control Deleting ALL Volume Punchthrough Commands To delete all programmed Volume Punchthrough settings and return the remote control back to the factory defaults, press and hold the VOL- button (the component button of the Volume Punchthrough lights). While holding the VOL- button, enter the code, 000, using the number buttons. All component buttons turn on for 2 seconds and then turn off. The remote returns to the factory settings. Note: I , , 4 .A . Using the INPUT Button 1. 2.
Using the Remote Control DVD codes Programmable for DVD and AUX•HD buttons. DVD Aiwa ................................................................... 3010, 3021 Apex ................................................................... 3023, 3024 Broksonic ........................................................... 3027, 3075 Daewoo........................................................................ 3028 Denon ...................................................... 3029, 3030, 3031 Emerson .............
Chapter 3 Using the TV's Features Chapter Overview: • Channel Banner • Digital and Analog Tuners • Autotuning • Parental Controls and V-Chip Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the TV’s Features Channel Banner There are several indicators that might appear when you press the TV or INFO button on the remote. What you see depends on the tuner you're watching (digital or analog) and the information available for the current program. This display is called the Channel Banner. The list at the bottom of this page describes the items on the Channel Banner screen (left to right and top to bottom).
Using the TV’s Features Digital and Analog Tuners T : Your TV has two tuners: one for regular, analog TV channels and one for digital channels. You can switch between the two by pressing the ANT•CAB button on your remote control when the remote is in TV mode. Digital Channels Digital channels can be made up of primary channels and subchannels. Subchannels (sometimes called minor channels) are channels associated with the Primary channel (sometimes called the major channel).
Using the TV’s Features ON•OFF 32 TV Chapter 3
Using the TV’s Features 5. Tuning Go back Set VCR channel Set AUX/HD channel Set SAT/CAB channel Set DVD channel VID1... DVI... CMP1... VID2... Press < or > key to select the input to be used for the AUX/HD key. Press the right arrow button to select the choice that matches the way you have the component connected to this TV, and press OK.
Using the TV’s Features Parental Controls and V-Chip The choices in the US V-CHIP and Canada V-CHIP menus involve software inside your TV (referred to as V-Chip) which allows you to block TV programs and movies based on violence, sex, or other content you may believe children should not view. Once you block programs, you can unblock programs by entering a password. By default, the software inside your TV is turned “off.” For instructions to turn on V-Chip, go to page 40. Note: P C DVI, CMP1, CMP2 .
Using the TV’s Features The V-Chip Rating Screen The following is an example of where items are located within the Rating Limit screen. R S F Lets you select whether the status of the age-based rating limit to C the left is View or Block. T Lists the content themes you can block or view. Go back R F V-Chip TV Rating Lets you select from a list of age-based ratings you can block or view.
Using the TV’s Features Blocking Age-Based Ratings V-Chip TV Rating Go back Status View View View View View View TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y D L S V FV You can automatically block all program ratings above a specified agebased rating level. To block programs with higher ratings: 1. Press the up or down arrow button to scroll to the rating corresponding with the lowest rating you do not want the child to watch. 2. Press the OK button to toggle between View and Block.
Using the TV’s Features Viewing Specific Content Themes If you block specific content themes, you have the option of going back and changing some of the them back to ( ) View: View 1. Determine the content themes you want to change to ( 2. Press the down arrow button to scroll to the rating whose content theme you want to change, such as language (L) corresponding with TV-14. 3. Press the right arrow button to move the yellow highlight to a particular content theme status. 4.
Using the TV’s Features Rating Canadian French V-Chip Rating System 18 ans + Adults. Programming is for adults only. This program contains sustained violence or extremely violent scenes. 16 ans + Viewers 16 and over. Programming is not suitable for those under age 16. This program contains frequent scenes of violence or intensely violent scenes. 13 ans + Viewers 13 and over. Programming may not be suitable for children under the age of 13.
Using the TV’s Features Movie Rating Go back NR X NC-17 R PG-13 PG G Status View... View... View... View... View... View... View... Press OK to View/Block programs with this rating. V-Chip Movie Rating Limit Set movie rating limits by blocking movies rated above a specified level. To access the Movie Rating Limit menu: 1. Press MENU on the remote control (the TV's MAIN MENU appears). 2. Select Parental Control. 3. Select US V-Chip. 4. Select V-Chip movie rating.
Using the TV’s Features Lock/Unlock Parental Controls Selecting this option lets you lock and unlock parental controls settings using a password. If you do not lock parental controls, none of the settings for V-Chip, Channel Block, or Front Panel Block will take effect. If you forget your password, press the MENU button, then select Parental Control (the password entry screen appears). Simultaneously press and hold CH+ and VOL+ on the front panel for 8 seconds.
Chapter 4 Using the TV's Menu System Chapter Overview: • Sound Menu • Picture Menu • Channel Guide Menu • Time Menu • Parental Control Menu • Setup Menu Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the TV’s Menu System Sound Menu The Sound menu lets you adjust audio output. To access the Sound menu, press MENU on the remote, and then select Sound from the main menu. Depending on the kind of signal you're watching, the Sound menu will have different d " items available for d you to adjust: • If you're watching the normal antenna input or any of the video inputs, yyou'll see the Sound menu $ items shown & in the first menu on the left.
Sound Using the TV’s Menu System Go back Sound settings Default Dig.Ch. Audio Lang. Current Dig.Ch. Audio Lang. Sound mode Sound logic Dynamic bass Headphone settings Graphic equalizer ... English... English... Normal... Medium... ... ... The Sound menu for the digital (ATSC) tuner Current Dig.Ch. Audio Lang. (available for the digital tuner only) Press the right arrow to choose from the audio languages available for the program you're watching.
Using the TV’s Menu System Picture Menu PICTURE Go back Advanced picture settings Picture preset Black level Color Contrast Sharpness Color warmth Tint ... Sports... Cool... Advanced picture settings Adv. pict. settings Go back Contrast expand Scan Velocity Modulation Autoformat Video noise reduction Optimized still picture Auto skin tone Film mode (3:2 Pulldown) Contrast expand You can adjust the contrast of the picture to suit the light of the room.
Using the TV’s Menu System Picture preset Displays a choice list that lets you select one of the preset picture settings: Vibrant, Cinematic, Natural, Sports, Videogame, Video Camera or Personal. Choose the setting that is best for your viewing environment. You can set a different picture preset for each input (including one for your regular TV channels). PICTURE Go back Advanced picture settings Picture preset Black level Color Contrast Sharpness Color warmth Tint ... Sports...
Using the TV’s Menu System Channel Guide Menu The Channel Guide lets you view the entire list of channel numbers and labels for the tuner you're on. Press the GUIDE button to bring up the Channel Guide menu. There are two different kinds of channel guides—the one you see depends on the tuner you're on. Channel Guide 02-01 03-01 03-02 03-03 05-01 05-02 08-01 08-02 09-01 To select a channel press OK. Page +: > Page - : < The Channel Guide for the digital tuner, showing channels and subchannels.
Using the TV’s Menu System Time Menu Time Go back Sleep timer 00:15 Sleep Timer Lets you set the TV to turn off after a given amount of time. Time Wake up timer Wake up time Wake up duration Channel number Daily 12:34 pm Time Lets you enter the current time. If it is eight o’clock, for example, you must first enter the number zero, then number eight. Use the OK button to choose between AM and PM. 06:00 am 01:00 04 ABC Wake up timer Lets you set the TV to turn itself on.
Setup Using the TV’s Menu System Setup Menu Go back Channel setup Preferences Closed caption Autotuning Convergence ... ... ... ... ... The Setup menu lets you configure the TV to fit its surroundings and your preferences. To access the Setup menu, press MENU on the remote, and then select Setup from the main menu. Channel setup Channel setup Go back Signal Source Analog Signal type Auto channel search Auto channel update List and labels Both... Cable... Start Start ...
Using the TV’s Menu System CC Go back Closed Caption Setting Analog CC Type Digital CC Type Digital CC Preset Digital CC Style On... CC1... Service 1... Custom... ... Press < or > key to select the closed caption setting. Closed Caption Many programs are encoded with closed-captioning information, which lets you display the audio portion of a program as text on the TV screen.
Using the TV’s Menu System Digital CC Preset Lets you choose the way the digital closed captioning appears on the screen. CC Go back Closed Caption Setting Analog CC Type Digital CC Type Digital CC Preset Digital CC Style On... CC1... Service 1... Custom... ... Press < or > key to select the closed caption setting. Dig.
Setup Setup Using the TV’s Menu System Go back Channel setup Preferences Closed caption Autotuning Convergence Go back Channel setup Preferences Closed caption Autotuning Convergence Chapter 4 ... ... ... ... ... ... ... ... ... ... Autotuning Displays a choice list that lets you set up the TV to automatically tune to the correct input channel when you press a component button (VCR, DVD, AUX•HD or SAT•CABLE) on the remote. Go to Chapter 3 for details about the Autotuning feature.
This page left blank intentionally.
Chapter 5 Other Information Chapter Overview: • Troubleshooting • Care and Cleaning • FCC Information • Limited Warranty • Accessory Information Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. Note for U.S. customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. TV Problems TV won’t turn on • Press the TV button. • Make sure the TV is plugged in.
Other Information Sound okay, picture poor • Check antenna connections. Make sure all of the cables are firmly connected to the jacks. • Try adjusting sharpness function to improve weak signals. Go to page 45 for more instructions. Can’t select certain channel • Make sure the remote control is in TV mode. Press the TV button and enter the channel number using the number buttons. • Channel may be blocked or not approved in the Parental Controls menu.
Other Information The Remote Control Doesn’t Work • Something might be between the remote and the remote sensor on the component. Make sure there is a clear path. • Maybe the remote isn’t aimed directly at the component (TV or VCR) that you’re trying to operate. • Maybe remote is not in TV Mode. Press the TV button so remote will control TV. • Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote.
Other Information Care and Cleaning CAUTION: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. Never use strong cleaning agents, such as ammoniabased cleaners, or abrasive powder.
Other Information RCA High-Definition Television (HDTV) Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor. • One year from date of purchase for parts. • Two years from date of purchase for the picture tubes. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
Other Information Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
Other Information VH47, price: $3.95 Remote Control This is the remote control that came packed with your TV. Replacements or spares can be ordered as needed. 267163, price: $31.
Index A D L S A/V receiver 16 Accessories 60 Age-based ratings 36 Amplifier 42 Analog closed captions 49, 50 Analog TV 2, 10, 30, 31, 46, 48 ANT•CAB button 2, 22 Antenna 2, 10, 45 Arrow buttons 22 Aspect ratio 3 ATSC 2 AUDIO button 22 Audio remote codes 27 Audio/Video cables, jacks 11, 60 Authorized service 9, 54 Autoformat 55 Automatic code search 24 Autotuning 32 Auto channel search/update 19, 48 Auto convergence 51 Auto on 48 Auto skin tone 44 AUX•HD button 22, 24 Digital sound 3 Digital closed capti
Visit the RCA website at www.rca.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. TTE Technology, Inc. 10330 North Meridian Street Indianapolis, IN 46290 ©2005 TTE Technology, Inc. RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation.