Installation Instructions

5
Maintenance
Always isolate the power from the mains and ensure the fire has cooled down before
any cleaning or maintenance is undertaken.
Cleaning the appliance
Carefully clean the air inlet and heater area with a cloth or vacuum on a regular basis. It is
important that these areas are kept free from dust / pet hairs etc.
Do not use abrasive cleaners on the appliance.
Do not spray liquids directly onto the appliance.
When cleaning the glass spray glass cleaner onto a cloth and then clean glass, buff dry
with a lint free cloth.
NOTE: The glass in the appliance is tempered for safety, if the glass receives a hard
impact it will shatter, take extra care to ensure the corners of the glass do not hit a hard
surface.
If removing the glass from the appliance to clean it then certain precautions need to be
followed.
Wear safety gloves /glasses / ensure the glass is placed on a soft surface.
We recommend for the large 1600 (64”) and 2000 (80”) appliances that 2 people are
needed to remove the glass.
Do not rely on the glass suction cup supplied to carry the weight of the glass, these are
only for tilting the glass back so it can be removed.
Battery Replacement
Replace the battery when the battery indicator is empty on the remote. Ensure to replace
with the correct type of battery (1.5V AAA), Ensure the batteries are installed in the
correct orientation.