Installation Instructions

1
Important Electrical safety
Read all instructions fully before using this electric fire.
This electric fire is for INDOOR USE ONLY.
If installing the appliance into an existing Chimney the chimney MUST be blocked off /
capped.
Do not locate the fire below or in front of a fixed socket outlet.
Warning DO NOT COVER the fan heater air inlet / outlet as it could cause possible fire.
Note the warning symbol on the fire.
Do not use the fire near a bath / shower / swimming pool.
Do not use the fire in areas where gasoline / paints / flammable liquids are stored, as they
may catch fire.
This appliance must be securely fixed / recessed to an internal wall in the property. Keep
all furniture / curtains etc as least 1 meter away from the fire.
The fire must be earthed.
After the fire’s installation the plug must be accessible.
Always disconnect the power supply before any cleaning / maintenance of the appliance.
Ensure the appliance is cool before proceeding.
If the power cord is damaged, it must be replaced by a qualified electrician or
manufacturer service technician.
Do not run the power cord under a carpet / rug etc. Always ensure it is routed securely and
it is not a trip hazard. Ensure the power cord is kept away from hot surfaces and areas.
Young children under 8 years old must always be supervised and must not play with the
fire. The appliance is not a toy. Do not throw anything at the glass or strike the glass of the
appliance.
The appliance must not be used by young children or the infirm, ensure a fire guard is
fitted to protect from burns as the fire can get very hot.
The appliance must not be used through an external switching device such as a timer or
connected to a circuit that is regularly on and off by a utility.
Do not use the appliance to dry clothes.