Installation Instructions

4
Operating Instructions
Pairing the remote to the appliance
To pair the remote to the appliance, first turn on the main switch to put the fire in the
standby mode. Press and hold the 2 buttons indicated for 5 seconds, then release and press
the button on the remote to complete the pairing process. To ensure the pairing process
has been successful simply press the button on the remote to turn the appliance on and
off. If the appliance does not turn on / off repeat the process.
Manual Operation
Main Power Switch
Push the main power switch to I, the main power indicator light will illuminate.
Manual Switch
Pressing the manual switch button turns the fire on and off.
Heater Button
Press the heater button once and the heater will turn on to half heat (750w). Press the
heater button a second time and the heater increases to full heat (1500w). Press the heater
button a third time and the heater will turn itself off.
Flame Button
Pressing the flame button will change the flame colour. There are four settings. Each time
the button is pressed the flame colour and pattern will change colour.