Magnum Dynalab MD 205 Signal Sleuth FM SIGNAL PROCESSOR INSTRUCTION MANUAL
-2- TABLE OF CONTENTS HOW THE MD 205 SIGNAL SLEUTH WORKS 3 SET UP AND OPERATION 4 IMPORTANT INSTRUCTIONS 5 PRODUCT SPECIFICATIONS 6 SAFETY SHEET 7 LIMITED WARRANTY 8
-3- HOW THE MD 205 SIGNAL SLEUTH WORKS The Sleuth is a tunable RF processor for the 88-108 MHz frequency band. It is capable of applying amplification or attenuation (+ 30dB to –30dB) within this frequency range. To accomplish its task, the Sleuth adds three RF stages to your existing tuner’s front end. This circuitry is designed and tuned to optimize the performance of any FM tuner. The Sleuth has a 600 KHz skirt to help improve the adjacent channel specification of your tuner.
-4- SET UP AND OPERATION DO NOT DISCARD THE PACKAGING. Should it be necessary to return the unit, and it is not packaged in its original packaging, you will be responsible for any damages that might occur during shipping. You may also be charged for the new packaging required to ship the unit back to you. 1. Familiarize yourself with the unit’s rear panel, noting the connector marked “Antenna Input” and which is “Output to Tuner”. 2. Connect one end of the supplied patch cord (3 ft.
-59. Rotate the RF Gain control counterclockwise until you see the signal strength get weaker or a noticeable change in the audio is heard, rotate the control clockwise until the optimum situation returns. 10. You may now turn the Mute switch to the ‘ON’ position. 11. To work with other frequencies, turn the Antenna switch on the Sleuth to the ‘bypass’ position, tune your tuner to the new frequency, turn the Tuning knob on the Sleuth to the same frequency, turn the Antenna switch to amplify.
-6- PRODUCT SPECIFICATIONS CIRCUIT: GAIN: TUNING RANGE: BANDWIDTH: NOISE: DISTORTION: ANTENNA INPUT: POWER REQUIRED: SIZE: WEIGHT: 3 varactor-tuned RF stages VARIABLE –30 dB thru + 30 dB 88-110 MHz Better than 400 KHz Less than 4 dB 0% 75 ohms 230/240/110 volts 17” x 1.75” x 6” 43.18cm x 4.45cm x 15.24cm 6 LBS/ 2.
-7- SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS DO NOT USE THIS APPARATUS IN WATER CLEAN ONLY WITH DRY CLOTH DO NOT BLOCK ANY VENTILATION OPENINGS, INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. 7. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. 8. DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDING TYPE PLUG.
-8- LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees this product to be free of defect in both material and workmanship and agrees to remedy any such defect or replace any defective component at no charge for a period of two years from date of sale to the first end user.