ST-2 Vertical, Omni-Directional, ½ Wave Antenna INSTALLATION INSTRUCTIONS
-2Installation Instructions Congratulations! You have just purchased one of the finest FM broadcast band receiving antennas on the market today. The ST-2 is a sturdy, high quality FM antenna. It has been built to maintain its excellent receiving characteristics while withstanding the rigors of nature in just about any geographical location where FM signals can be received.
-3Turn on the tuner and tune across the dial. Your reception should be acceptable, with distant stations that might have previously been noisy being received more clearly. With these results obtained, reception should be improved even more markedly when installed outdoors, as high up as possible. If reception is noisy, with one or more stations being received at more than one point on the dial, your tuner’s front end is probably being ‘saturated’ with the increased signal from the antenna.
-4would be to temporarily locate the antenna at the intended site and note the quality of reception. Be sure you stand well away from the antenna during each test so as to avoid having your body’s inductance affect the outcome. Continue the procedure until the best reception location has been found. When finalizing the installation, make sure that the gold portion of the coil assembly extends above any metal obstructions, such as railings.