Manualshelf

PT-100 Manual

ManualsBrandsMagnum Energy ManualsCharge ControllersPT-100 Charge Controller
11121314151617181920
© 2017 Sensata TechnologiesPage 2
Introduction
1
PT Mounting Bracket – used to secure the charge controller to a wall or to a Magnum
panel. See Section 2.3 for information on locating and mounting the PT controller.
2
PT Display – LED display and indicators illuminate to provide information on charge
controller operation. See Section 4.0 for information on the PT display’s operation.
3
Access Cover – under the removable front access cover is the DC wiring terminal, the
switches used for confi guring the PT-100, and the cable connection ports to connect
accessories. See Section 2.3.1 for information on how to remove this cover to access the
compartment.
Figure 1-1, Front Features
1.3 Physical Features
The PT-100 charge controller is designed to allow easy access to wiring, circuit breakers, and
controls. Its die cast baseplate with two-piece cover ensures maximum durability with minimum
weight for more effi cient operation.
As shown in Figure 1-1, the front of the PT-100 charge controller is equipped with the following:
12345 678910
Access Cover
3
PT Mounting Bracket
1
PT Display
2