Spec Sheet

ManualsBrandsMagnum Energy ManualsSolar & Wind PowerME AGS-N w/PT2 pigtail adapter (Must be Connected to a Magnum Inverter)

Page 1

www.sensata.com

ME-AGS

AUTOMATIC GENERATOR START MODULE

AUTOMATICALLY START YOUR GENERATOR

Features

• Automatically start your generator – The AGS is designed to auto-

matically start your generator based on low battery condition or the

inside room temperature.

• Adjust the AGS to meet your needs – With the ME-AGS-N you can

set multiple parameters for starting and stopping the generator.

Using the ME-RC, the ME-AGS-N has basic adjustments starting

on battery voltage or temperature. When using the ME-ARC, the

ME-AGS-N has advanced start and stop features, including battery

voltage, time of day, AC amps, exercise time, and SOC.**

• Two models are available – The stand alone version of the AGS

(ME-AGS-S) works well for installation and operation without an

inverter. The network version of the AGS (ME-AGS-N) allows

operation of the AGS via the ME-RC or ME-ARC remote panel.

ME-AGS-N Features*

• All settings are adjustable from the ME-RC and ME-ARC remotes.

• Auto start is locked out when utility power is present.

• View generator Start and Fault statuses.

Options

• ME-AGS-N kit includes – AGS module (3 relay), 10’ network cable, and

a 60’ remote temperature sensor cable.

• ME-AGS-S kit includes – AGS module (3 relay), Remote on/off/test

switch, switch bezel, a 25’ 6-wire cable, and has basic adjustments

starting on battery voltage or temperature.

** SOC feature requires the ME-BMK or ME-BMK-NS

Introduction

Imagine being able to enjoy a day away all-the-while knowing your living space will stay cool and comfortable and your batteries will stay charged

and ready for all of the activities that make up daily life. There’s nothing better than returning to a nice, cool, comfortable home with charged

batteries after a day away. The Auto Gen Start ME-AGS can make this happen.

The ME-AGS is compatible with most major generators, including Onan, Powertech, Generac, Westerbeke, Kohler, EPS, Northern Lights, and most

portable generators with electric start. Please check with your Sensata Technologies dealer for specific model compatibility.

Model Numbers

• ME-AGS-S

• ME-AGS-N

Works With

• ME Series Inverter/Charger

• MS Series Inverter/Charger

• MSH-M Series Inverter/Charger

The ME-AGS-S does not require an inverter/charger.

Available Accessories

• ME-PT1

• ME-PT2

Please call and ask about our PT-1 and PT-2

pigtails for starting on demand applications.

Summary of content (3 pages)

PAGE 1
ME-AGS | AUTOMATIC GENERATOR START MODULE AUTOMATICALLY START YOUR GENERATOR Introduction Imagine being able to enjoy a day away all-the-while knowing your living space will stay cool and comfortable and your batteries will stay charged and ready for all of the activities that make up daily life. There’s nothing better than returning to a nice, cool, comfortable home with charged batteries after a day away. The Auto Gen Start ME-AGS can make this happen.
PAGE 2
DIAGRAMS AGS Wiring Diagram for Stand Alone Systems (ME-AGS-S) Multipy voltage x2 for 24 volts, x4 for 48 volts GENERATOR HOUR METER 3 75 1 5 — RUN TIME HOURS + 11 65 10 OFF OFF 85 START TEMP °F 12 Auto Gen Start 9-9 10-8 OFF 12 START VOLTS DC 9-8 9-7 8A 4P 11-8 CLOCK AM/PM QUIET TIME PM/AM TEST STATUS PUSH TO TEST GROUND GREEN=GEN RUN RED=GEN FAULT GRN BLINK=GEN START READY AUTO GENERATOR START Standalone Version REMOTE GEN AND POWER I/O 1 2 3 4 5 6 7 8 AUX AUX 6 WIRE PH
PAGE 3
Page 3 Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices.