Installation Manual

Setup

FAVS Menu Default Settings:

• FAVS: F1 Search Watts – This is the F1 default (FAVS #1). Refer to the SETUP: 02A Search

Watts menu item on page 20 for information on how to adjust the Search Watts setting.

• FAVS: F2 LBCO (Low Battery Cut Out) Setting – This is the F2 default (FAVS #2). Refer

to the SETUP: 02B LBCO Setting menu item on page 21 for information on how to adjust the

LBCO setting.

• FAVS: F3 AC Input Amps – This is the F3 default (FAVS #3). Refer to the SETUP: 03A AC

Input Amps menu item on page 24 for information on how to adjust the AC Input setting.

• FAVS: F4 Battery Type – This is the F4 default (FAVS #4). Refer to the SETUP: 03C Battery

Type menu item on page 26 for information on how to set the battery type.

• FAVS: F5 Gen Control – This is the F5 default (FAVS #5). Refer to the CTRL: 03 Gen Control

menu on page 72 for information on how to use the Gen Control function.

Info: F5 Gen Control is a menu heading. It provides easy access to turn the generator

on and off. If another menu item is saved in the F5 location, the only way to bring Gen

Control back into the F5 location is to reset the remote to its factory defaults using the

TECH: 08 Load Defaults menu (page 39).

Rotary SELECT Knob

LCD

Display

FAVS Button

Float Charging

DC 13.34V + 0A

Figure 3-3, FAVS Button and Menus

Press to

edit setting

Press

FAVS

Rotate to desired

selection:

Top line shows current

FAVS menu and

position in FAVS menu.

Bottom line shows

current setting.

To select a FAVS

item

F1 Search Watts

5 Watts

F2 LBCO Setting

F3 AC Input

F4 Battery Type

F5 Gen Control

Note: These are default selections

that you can change.