Installation Manual

Safety Information

Page ii

Important Product Safety Instructions

This manual contains safety instructions that must be followed during the installation and opera-

tion of this product. Read all instructions and safety information contained in this manual before

installing or using this product.

Safety Symbols

To reduce the risk of electrical shock, ﬁ re, or other safety hazard, the following safety symbols

have been placed throughout this manual to indicate dangerous and important safety instruc-

tions.

WARNING: Indicates that failure to take a speciﬁ ed action could result in physical

harm to the user.

CAUTION: Indicates that failure to take a speciﬁ ed action could result in damage to

the equipment.

Info: Indicates information that emphasizes or supplements important points of the

main text.

Remedy: Provides possible solutions for related issues.

Product Safety Alerts

All electrical work must be performed in accordance with local, state, and federal electrical codes.

WARNINGS:

• All electrical work must be performed in accordance with local, state and federal

electric codes.

• This product is designed for indoor/compartment installation. It must not be exposed

to rain, snow, moisture, or liquids of any type.

• Use insulated tools to reduce the chance of electrical shock or accidental short

circuits.

• Remove all jewelry such as rings, watches, bracelets, etc., when installing or

performing maintenance on the inverter.

• Always disconnect the batteries or energy source prior to installing or performing

maintenance on the inverter. Live power may be present at more than one point

since an inverter utilizes both batteries and AC. Turning off the inverter may not

reduce this risk on some Magnum inverters. As long as AC power is connected, it

will pass through the inverter regardless of the power switch on the inverter or the

ON/OFF INVERTER button on the remote.