Spec Sheet

Quickly and easily connect multiple inverter/chargers, charge controllers,
and accessories without individual programming using the Magnum Energy
ME-ARTR Router. This advanced router is designed to provide system-level
connectivity and programming for large Magnum Energy installations. One ME-ARTR can
accommodate up to four MS-PAE or MS-PE inverter/chargers in parallel and program up
to seven PT-100 solar charge controllers at once. The advanced router can also handle
two ME-AGS modules, multiple ME-BMK monitors, and one ME-ARC or ME-RC remote.
ME-ARTR
Advanced Router Provides Complete
System-level Connectivity and Programming
Advanced Router Features
 Harvest up to 42kW of solar with
the ability to program and connect to
the balance of system equipment with
one ME-ARTR.
 Install firmware upgrades in the field
with a microSD card.
 “Bulk Always” setting always starts in
BULK charging mode, ideal for charging
li-on chemistries with custom settings.
 Optimized scheduling parameters
with pop-up reminders for better
feedback to ensure the system is
perfoming at peak levels.
 No programming necessary for MS-PAE
parallel operation.
Model Number
 ME-MGT-MW
Works With
 MMP Panel System
 MP Panel System
 MS-PAE Inverter/Charger
 MS-PE Inverter/Charger
 PT-100 Charge Controller
 ME-AGS Auto Gen Start
 ME-BMK Battery Monitor
 ME-ARC Remote
 ME-RC Remote
Magnum Energy MPDH Panel and
four MS-PAE Inverter/Chargers
IDEAL FOR
USE WITH
Up to seven (7) PT-100 Charge Controllers
for 42kW output at 48V
THE ME-ARTR IS DESIGNED TO CONNECT LARGE
MAGNUM ENERGY INSTALLATIONS