Owner`s manual

©2013 Magnum Energy, Inc. 6
FAULT
PWR
CHG
INV
Inverting
DC 25.2V - 10A
Top line: Current status of inverter
Bottom line: Voltage from the batteries connected to the
inverter, and the battery current used by the inverter
2.0 Installation
After five minutes without a button being pressed, the remote displays the
ME-RC’s home screen (see example below).
Figure 2-5, Power-up Self Test Screens
FAULT
PWR
CHG
INV
MAGNUM ENERGY
Self Test
FAULT
PWR
CHG
INV
(C)2003-2013
Connecting to..
FAULT
PWR
CHG
INV
ME-RC V 2.7
INV/CHG V #.#
No LEDs light
PWR lights green
FAULT lights red
CHG lights green
INV lights green
CHG lights green
INV lights green
FAULT
PWR
CHG
INV
Off
DC 25.5V - 0A
All LEDs are off*
2.5 Power-up Self Test
Info: All power to operate the remote control is provided by the
inverter/charger through the remote cable.
When the ME-RC is fi rst connected to an inverter, a power-up self test is
initialized. The LCD automatically displays the following screens (Figure 2-5):
Figure 2-6, Example: ME-RC Home Screen
* – If the Power-up Always feature is enabled and DC is reconnected to the
inverter, the inverter will turn on automatically once the self test is complete.