Specifications Sheet
ME SERIES INVERTER/CHARGER
The ME Series Inverter / Charger from Sensata Technologies is a modified sine wave
inverter designed specifically for rugged mobile applications. The ME Series is powerful,
easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/
cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter’s
output to your distribution circuits or electrical panel, connect your shore power cable
(AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on
the power.
FEATURES
Power Factor Corrected (PFC)
Charger:
Our PFC charger is built into all of our
inverter / chargers. It uses less energy
from a generator than a standard charger
– using 25-30% less AC current than
standard chargers.
Choices:
The ME Series comes in three power
models and optional built-in branch rated
AC output breakers, allowing you to
choose the model that is right for you.
Versatile mounting:
Mount the ME Series on a shelf,
bulkhead, or even upside down.
Lightweight:
The lightweight aluminum base and
cover also provides noise reduction and
corrosion resistance.
Multiple ports:
The ME Series provides multiple ports,
including an RS485 communication port
for network expansion, and a remote port.
Model Numbers
ME2012
ME2012-20B
ME2512
ME3112
Available for
Marine Systems
RV Systems
Available Accessories
Auto Generator Start
Battery Monitor Kit
Conduit Box
DC Load Disconnect
Fuse Blocks
Ignitions Switch Lockout
MagWeb
Remote - ME-ARC
Remote - ME-RC
Remote - MM-RC
Remote Switch Adapter
Smart Battery Combiner
New features available using the ME-
ARC (with v5.4 or higher firmware).
Accessible design:
The extra large AC access cover with
terminal screw block and 360° DC
connection terminals with covers make
this inverter more accessible when it
needs to be.
Convenient switches:
The ME Series comes with an on/off
inverter-mounted switch with an easy-to-
read LED indicator.
Expanded transfer relay:
60 Amp transfer service is available on all
models, and can be wired in three ways,
including single in / single out, single in /
dual out, or dual in / dual out.
Buy with ease:
The ME Series is backed by a three-year
(36-month) limited warranty.
Modified
Sine
Wave
Battery
Voltage
Options
12
Continuous
Output
Options
2000-
3100 VA