Installation Manual

© 2016 Sensata Technologies
8
Installation
Step 6: Completing Installation of the MicroGT 500s
Each MicroGT 500 microinverter has two removable serial number
labels on the front side (Figure 10).
Use these serial number labels to create your system’s microinverter
array installation map.
Note: The unique serial number for each MicroGT is also the ‘Inverter
ID’ that is programmed into the MagWeb GT device.
For each microinverter:
• One label for each channel (i.e., each microinverter powers two
panels—A & B). See below.
101123458045 101123458049101123458044 … ..
101123458044
101123458044
AB
ABAB
Figure 10, MicroGT Inverter Serial Numbers
Example: In the above, serial number “101123458044” identifi es
the fi rst microinverter in the displayed array. “101123458044-A”
identifi es that microinverter’s right PV panel, and serial number
“101123458044-B” identifi es that microinverter’s left PV panel.
Note: For every MicroGT microinverter, the side with the longest AC
connector is always labelled “B”.