Specifications Sheet

MicroGT 500 Inverter
Grid-Tie Microinverter Ideal for use with
Battery Backup Systems
MICROGT 500 INVERTER SPECIFICATIONS
INPUT
Recommended PV Module Power RangePower 180-310W
MPPT Voltage Range 22-45V
Maximum Input Voltage 55V
Maximum Input Current 12A X 2
OUTPUT DATA
Rated Output Power 500W
Maximum Output Current 2.08A @ 240V
Nominal Output Voltage/Range - 240V 240V/211V-264V
Nominal Output Frequency/Range 60Hz/ 59.3-60.5Hz (Programmable per customer and utility requirements.)
Power Factor >0.99
Total Harmonic Distortion <3%
Maximum Units Per Branch 7 per 20A @ 240V
GENERAL SPECIFICATIONS
Peak Efficiency 95.5%
Listings & Compliance
Emissions & Immunity (EMC) Compliance FCC PART 15, ANSI C63.4 2003, ICES-003 Safety Class Compliance
Grid Connection Compliance IEEE 1547
UL 1741 , CSA C22.2, No. 107.1-01, NEC2014 690.12
Warranty 10 years standard, extendable to 25 years
ENVIRONMENTAL SPECIFICATIONS
Operating temperature / Storage temperature -40°F to +149°F (-40°C to +65°C) / -40°F to +185°F (-40°C to +85°C)
Enclosure rating NEMA 6
PHYSICAL SPECIFICATIONS
Unit dimensions (w x h x d) 8.75” x 6.5” x 1.1” (221mm x 167mm x 29mm)
Weight 5.5 lbs (2.5kg)
Sensata Technologies is excited to introduce the Magnum Energy MicroGT 500 Inverter. Optimized to
communicate with a Magnum battery-based system, allowing the addition of battery storage, the MicroGT
500 offers a lot in a little box.
FEATURES
Supports two modules per inverter,
reducing installation labor time.
Handles up to 310W modules with
negligible clipping, delivering 250W
AC per module.
Individual MPPT for each module.
Module-level electronics mitigates
shading issues and increases system
output and reliability.
Using seven MicroGT 500 inverters,
string up to 14 solar modules with a
20A breaker.
Ready for install in your area:
UL1741 and NEC690.12 compliant.
Storage-ready: Optimized to regulate
AC coupled Magnum battery-based
inverters, increasing battery life.
AVAILABLE ACCESSORIES
MagWeb GT: Integrated dash board
of the MicroGT output and MS-PAE
Inverter/Charger output, ME-BMK,
and Magnum remote output of the
battery state-of-charge
AC termination cable
AC extension connection cable
Interconnection cable between
inverter and MagWeb GT

Summary of content (2 pages)