Owner`s manual

Troubleshooting

4.1 Performing an Inverter Reset

Under some fault conditions (i.e. an ‘internal’ fault) the inverter will need to be reset.

To reset the inverter:

Press and hold the Power ON/OFF pushbutton (see ¿ gure 4-1) for approximately ¿ fteen (15)

seconds until the Charging/Inverting Status LED comes on and À ashes rapidly; once the rapid

À ashing has begun, release the Power ON/OFF pushbutton. The Status LED will go off after the

pushbutton is released.

After the inverter reset is completed, press the ON/OFF pushbutton to turn the inverter ON.

Info: The Power ON/OFF pushbutton is a small momentary type switch which operates

by lightly pressing and releasing.

Figure 4-1, Performing an Inverter Reset

1. Press and hold the Power ON/

OFF pushbutton.

2. Watch the Charging/Inverting

Status LED, after approximately

15 seconds it should come on

and À ash rapidly to indicate the

inverter has reset. The Status LED

will go off after the pushbutton is

released.