MSH-M Series Specifications

ManualsBrandsMagnum Energy ManualsInverterMagnum Energy MSH4024M Inverter

Page 1

www.sensata.com

MSH-M SERIES

INVERTER / CHARGER

Features

• Load Support – Load support parallels the inverter output

with incoming AC sources allowing it to run larger loads

from smaller generators.

• Battery Profile Presets – Using the ME-RC or

ME-ARC Remote Controls, easily choose from and

set standard battery profiles, including Lithium Iron

Phosphate (LFP) – only available via the ME-RC, Gel,

Flooded, AGM1, and AGM2.

• Pure Sine Wave – Power your sensitive electronics

without worry. The MSH-M Series provides reliable

utility-grade power.

• Interchangeable – The MSH-M is interchangeable with

the Magnum MS Series and uses the same accessories as

the MS Series.

• Multiple Ports – The MSH-M Series provides multiple

ports, including an RS485 communication port for network

expansion, and a remote port.

• Convenient Wiring Access – An extra large AC access

cover with terminal screw block and 360° DC connection

terminals with covers make wiring easier.

• Convenient Switches – The MSH-M Series comes with

an on /off inverter-mounted switch with an easy-to-read

LED indicator.

• Buy with Ease – The MSH-M Series is backed by a

three-year (36-month) limited warranty.

Options

• 12 and 24-volt and 3000 or 4000 watt output

configurations available

Introduction

The MSH-M Series inverter/charger from Sensata Technologies – a pure sine wave inverter designed with true hybrid technology allowing it to run

larger loads from smaller generators. Most inverters only use one source of energy to power loads, either from incoming AC power – shore or AC

generator – or from the batteries. The MSH-M Series combines the energy from both sources to power loads. This allows the inverter to recharge

the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself.

Model Numbers

• MSH3012M

• MSH4024M

Available For

• Marine Systems

• RV Systems

Available Accessories

• Auto Generator Start - ME-AGS-N

• Battery Monitor Kit

• Conduit Box

• DC Load Disconnect

• Fuse Blocks

• MagWeb

• Remote - ME-ARC

• Remote - ME-RC

• Remote Switch Adapter

• Smart Battery Combiner

Pure Sine Wave

12, 24

3000-

4000 VA

Battery Voltage Options Continuous Output Options

Summary of content (3 pages)

PAGE 1
MSH-M SERIES | INVERTER / CHARGER Introduction The MSH-M Series inverter/charger from Sensata Technologies – a pure sine wave inverter designed with true hybrid technology allowing it to run larger loads from smaller generators. Most inverters only use one source of energy to power loads, either from incoming AC power – shore or AC generator – or from the batteries. The MSH-M Series combines the energy from both sources to power loads.
PAGE 2
SPECIFICATIONS MSH3012M MSH4024M Input battery voltage range 9 to 17 VDC 18 to 34 VDC Nominal AC output voltage 120 VAC ± 5% 120 VAC ± 5% Output frequency and accuracy 60 Hz ± 0.05 Hz 60 Hz ± 0.
PAGE 3
ENVIRONMENTAL SPECIFICATIONS Temperature (Operating/Non-operating) -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non-condensing PHYSICAL SPECIFICATIONS Dimensions (l x w x h) 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) Shipping dimensions (l x w x h) Mounting 19” x 17” x 13” (48.3 cm x 43.2 cm x 33 cm) Shelf or wall (vents not allowed to face downward unless ME-CB or MPX-CB is installed) Weight 55 lb (24.