Product Specifications

The MSH-M Series Inverter / Charger from Sensata Technologies – a pure sine wave
inverter designed with true hybrid technology allowing it to run larger loads from
smaller generators.
Hybrid technology: Most inverters only use one source of energy to power loads, either
from incoming AC power – shore or AC generator – or from the batteries. The MSH-M
Series combines the energy from both sources to power loads. This allows the inverter to
recharge the batteries when there is surplus power or deliver more power to the loads if
they require more than the AC input can supply by itself.
Load support: Load support parallels the inverter output with incoming AC sources
allowing it to run larger loads from smaller generators.
Model Numbers
 MSH3012M
 MSH4024M
Available For
 Marine Systems
 RV Systems
Available Accessories
 Auto Generator Start - ME-AGS-N
 Battery Monitor Kit
 Conduit Box
 DC Load Disconnect
 Fuse Blocks
 MagWeb
 Remote - ME-ARC*
 Remote - ME-RC*
 Remote Switch Adapter
 Smart Battery Combiner
FEATURES
Pure sine wave:
Power your T.V.s, stereos, plasma screens,
and other sensitive electronics without
worry. The pure sine wave inverter and
power factor corrected charger provide
clean, reliable inverter power with low
total harmonic distortion (THD) of less
than 5%.
Easy-to-install:
Install the MSH-M Series in four easy
steps: simply connect the inverter’s
output to your distribution circuits or
electrical panel, connect your utility
power cable to the inverter’s easy-to-reach
terminal block, connect the batteries, and
switch on the power.
Choices:
The MSH-M Series comes in 12 and
24 volt configurations, allowing you to
choose the model that is right for you.
Interchangeable:
The MSH-M is interchangeable with the
Magnum MS Series and uses the same
accessories as the MS Series.
Lightweight:
The lightweight aluminum base and
cover also provides noise reduction and
corrosion resistance.
Multiple ports:
The MSH-M Series provides
multiple ports, including an RS485
communication port for network
expansion, and a remote port.
Accessible design:
The extra large AC access cover with
terminal screw block and 360° DC
connection terminals with covers make
this inverter more accessible when it
needs to be.
Convenient switches:
The MSH-M Series comes with an
on /off inverter-mounted switch with
an easy-to-read LED indicator.
Buy with ease:
The MSH-M Series is backed by a
three-year (36-month) limited warranty.
THE MSH-M SERIES INVERTER / CHARGER
Battery
Voltage
Options
12, 24
Continuous
Output
Options
3000-
4000 VA
Pure
Sine
Wave
* New status displays require ME-RC v2.7
or ME-ARC v3.0 or higher.