Instruction manual

OUT/TAGOUT” PROCEDURES ESTABLISHED BY YOUR COMPANY BEFORE

WORKING ON ANY EQUIPMENT.

• NEVER ATTEMPT TO RIDE ON A MOVING PIECE OF MACHINERY.

• DO NOT WALK ON MACHINERY GUARDS, GRATINGS, OR COVERS.

• DO NOT PLACE HANDS, FEET OR ANY PART OF THE BODY NEAR MOVING

PARTS.

• NEVER WEAR LOOSE CLOTHING, NECKTIES, OR JEWELRY AROUND MOV-

ING PARTS. LONG HAIR SHOULD BE SECURED UNDER A CAP OR HAT.

• ALWAYS WEAR EYE PROTECTION, HEARING PROTECTION, RESPIRATORS,

GLOVES, HARD HATS, SAFETY SHOES AND OTHER PROTECTIVE CLOTHING

WHEN REQUIRED. MATERIAL CAN AND WILL FALL OFF AT ANY POINT AND

CAN CAUSE SERIOUS INJURY.

• KEEP ALL OPERATING PERSONNEL ADVISED OF THE LOCATION AND

OPERATION OF ALL EMERGENCY STOPS AND CONTROLS. CLEAR ACCESS

MUST BE PROVIDED TO THESE STOPS AND CONTROLS MUST BE MAIN-

TAINED AT ALL TIMES.

• FREQUENT INSPECTIONS OF ALL EMERGENCY STOPS, CONTROLS,

GUARDS, GRATINGS OR COVERS MUST BE MAINTAINED AT ALL TIMES.

• ALWAYS FOLLOW “LOCKOUT/TAGOUT” PROCEDURES ETABLISHED BY

YOUR COMPANY WHEN PERFORMING ANY TYPE OF MAINTENANCE OR

REPAIR.

• BEFORE STARTING ANY EQUIPMENT, MAKE SURE THAT THE OPERATOR

HAS RE

AD AND UNDERSTANDS ALL OPERATION AND SAFTEY GUIDELINES.

VERIFY THAT THE AREA AND EQUIPMENT ARE SAFE FOR OPERATION AND

ALL GUARDS ARE IN PLACE AND SECURE. OPERATORS MUST PERFORM A

PRE-OPERATION SAFETY INSPECTION.

• NEVER ALTER, MODIFY OR ATTEMPT TO USE THE CONVEYOR FOR ANY-

THING OTHER THAN ITS INTENDED USE.

HYDRAULIC SYSTEMS SAFETY (IF EQUIPPED)

• CHECK ALL HOSES FOR SIGNS OF WEAKNESS OR CRACKS BEFORE USING

EQUIPMENT.