Specifications
Maintenance and Service
26 312082B
Maintenance and Service
Caring for Sprayer
• Keep sprayer and all
accessories clean and
in good working order.
• To avoid overheating
motor, keep vent holes
in shroud clear for air
flow.
• Do not cover sprayer
while spraying.
Paint Hoses
Check hose for damage every time you spray. Do not
attempt to repair hose if hose jacket or fittings are dam-
aged. Wrench tighten, using two wrenches.
Tips
• Always clean tips with
compatible solvent and
brush after spraying.
• Tips may require
replacement after 15
gallons (57 liters) or they
may last through 60 gallons
(227 liters) depending on
abrasiveness of paint.
• Do not spray with worn tip.
Pump Packings
When pump packings wear, paint
will begin to leak down outside of
pump.
CAUTION
Protect the internal drive parts of this sprayer
from water. Openings in shroud allow cooling of
mechanical parts and electronics inside. If water gets
into these openings, the sprayer could malfunction or
be permanently damaged.
ti9580a
ti9742a
WLD
ti9212a