Specifications

Technical Data
312082B 27
Technical Data
Working pressure range 0-3000 psi (0-21 MPa, 0 -207 bar)
Electric motor 6.5 AMP (open frame, universal)
Operating horsepower 1/2
Maximum delivery (with tip) 0.31 gpm (1.17 lpm)
Paint hose 1/4 in. x 35 ft
(6.4 mm x 11 m)
Maximum tip hole size 0.017 in. (0.43 mm)
Weight, sprayer only 15 lb (7 kg)
Weight, sprayer, hose & gun 20 lb (9 kg)
Dimensions: Length 17.5 in. (44.5 cm)
Width 18.0 in. (46 cm)
Height 41.25 in. (105 cm)
Height folded handle 24.25 in (61.5 cm)
Power cord 18 AWG, 3-wire, 6 ft (1.8 m)
Fluid inlet fitting 3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting 1/4 NPSM external thread
Inlet screen 35 mesh (450 micron)
Wetted parts, pump & hose stainless steel, brass, ultra-high molecular weight polyethylene
(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene,
fluroelastomer
Wetted parts, gun SG10: plated steel, nylon, aluminum, tungsten carbide, stainless steel,
brass, fluroelastomer
Generator requirement 1500 Watt minimum
Electrical power requirement 120VAC, 60 Hz, 1 phase, 15A
Storage temperature range ◆❖ -30° to 160°F (-35° to 71°C)
Operating temperature range ✔ 40° to 115°F (4° to 46°C)
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in
pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.